|
|
|
2010 2011 BMW 5 Series Forum F10 Engine Management Fuse 42 keeps blowing |
|
Post Reply |
|
Thread Tools | Search this Thread |
06-22-2022, 06:03 AM | #1 |
New Member
1
Rep 7
Posts |
Engine Management Fuse 42 keeps blowing
Hi All,
BMW f11 520d 2014 Not sure how to troubleshoot this issue to be honest, Fuse 42 keeps blowing after driving for couple of minutes. 42 30A Electro-hydraulic engine mounting solenoids / EGR cooling bypass valve / Oil quality sensor Oxygen sensor behind the catalytic converter / Oxygen sensor in front of the catalytic converter / Mass airflow meter Compressor bypass / Mass airflow meter / Oil level sensor / Wastegate control solenoid What happened is I reversed in to wooden pole at like 2-3mph with the side were exhaust is on 520d. Since then 42 fuse in glove box keeps blowing. I have lifted the car up and inspected exhaust from every possible corner including all sensors, no damage anywhere. Impact speed was near to nothing and there is only a little scratch on the car, but this must of triggered something. any idea how i can troubleshoot this? |
Post Reply |
Bookmarks |
|
|