|
|
|
2010 2011 BMW 5 Series Forum F10 523i N53 nox and map sensor problems |
|
Post Reply |
|
Thread Tools | Search this Thread |
12-24-2023, 10:50 AM | #1 |
New Member
0
Rep 6
Posts |
523i N53 nox and map sensor problems
Hello, I have recently bought a 2012 523i with 3.0 n53 engine , 170.000 kms.
The Car already gave me lots of problems , but I am determined to fix It. It has Always run Rich with sooty exhaust , High fuel consumption 6-9 km/l mixed Urban and highway with some light towing . I noticed a very lumpy idle at Cold starts only , found wet plugs and verified that 3 injectors were leaking , so I replaced them and coded . Also 6 new Spark plugs and coils . This fixed the idle , checking operational smoothness at Cold start with Ista d returns values around zero for Every cylinder ( between 1 and -1 ) , so I Guess the injectors are now fine . But I still have High fuel consumption , although a bit Better , managed 11 km/l on a tank of highway diving , but still around 6 km/l in Urban and towing a very light motorbike trailer. Still sooty exhaust . I keep getting errors for nox sensor , trying to find the courage to buy a 500 euros genuine sensor , because I fear the errors would persist or the fuel consumption would not change. I don't have any error regarding nox catalyst . Has anyone installed a genuine nox sensor and gained normale fuel consumption ? Don't tell me to buy Noxem , because I had a terribile experience with the Seller. Lastly , I keep getting the error regarding the intake fuel differential pressure sensor , bought a new Non-genuine sensor from auto-doc (vemo brand) , installed , but the car seems to reject It because when I delete errors memory with ista It stays on permanently without being canceled . Instead , with the genuine sensor , The error disappears after ista deletes It , only to reappear after a short drive . I tried the test Plan with ista for testing the sensor , and It seams to work as intended , but the error Always comes back ( the program says It occured millions of times !) Could It be a vacuum leak ? I couldn't find any when I recently disassembled the plenum for cleaning intake valves , EGR , throttle body... ) Any input Is very appreciated , as this car Is diving me nuts !! (Not to talk about vibrations , brake judder , and suspension problem ...) |
Post Reply |
Bookmarks |
|
|