![]() |
|
|
| 10-20-2024, 02:48 PM | #1 |
|
Enlisted Member
![]() 5
Rep 47
Posts |
Helpt! steering angle adjusting on ISTA
So, finally got the app and wire. However when I ran everything on app and tried to run the steering angle adjust, the fkr gave me this error:
"Voltage supply faulty or fault on the following control unit: -Steering column switch cluster." I've check everything and everything works, just can't run the steering angle adjust without it hitting this error before canceling... any help? Last edited by rssazn; 10-20-2024 at 03:07 PM.. |
Post Reply |
| Bookmarks |
| Thread Tools | |
|
|