BMW F10 Coding DIY (and other Fxx models)

F10Thai · 12-14-2014, 09:40 AM

Hi, Shawn

I cannot find anything under JBBF as

Originally Posted by shawnsheridan View Post
JBBF => RLS_DEF_FLC_SCHWELLWERT_SATZ
JBBF = >RLS_FLC_SCHWELLWERT_SATZ

normal
empfindlich = sensitive
sehr_empfindlich = very sensitive
unempfindlich = insensitive

Is there any other way to adjust the sensitive of headlight sensor?

shawnsheridan · 12-14-2014, 10:00 AM

Quote:

Originally Posted by F10Thai

Hi, Shawn

I cannot find anything under JBBF as

Originally Posted by shawnsheridan View Post
JBBF => RLS_DEF_FLC_SCHWELLWERT_SATZ
JBBF = >RLS_FLC_SCHWELLWERT_SATZ

normal
empfindlich = sensitive
sehr_empfindlich = very sensitive
unempfindlich = insensitive

Is there any other way to adjust the sensitive of headlight sensor?

You could use an E-Wort, but what is the name of you JBBF CAFD?

ZAKSM3 · 12-19-2014, 01:50 AM

Does anyone know if it is possible to code the headlight washers on and off on a 2011 528i?

Thanks!

shawnsheridan · 12-19-2014, 05:52 AM

Quote:

Originally Posted by prozak76

Does anyone know if it is possible to code the headlight washers on and off on a 2011 528i?

Thanks!

JBBF => SCHEINWERFERREINIGUNG = nicht_aktiv

ZAKSM3 · 12-19-2014, 06:16 AM

Thank you! I hate those damn headlight washers!

Captain Monte · 12-21-2014, 08:14 AM

I just recently purchased a f10 550i. I was wondering if anyone does coding in the Tampa Bay Area.

This is my first bmw with Idrive, I've just read about changing many options and this peaked my interest. Any info would be great.

Captain Monte · 12-21-2014, 08:23 AM

I'm looking for someone in Tampa or around Tampa to do some coding. Any help would be great.

Rieger · 01-23-2016, 05:23 PM

H1 siren installed in my F11 and mirror with LED.
How to enable LED blinking without DWA?

DaHeadlightGuy · 02-17-2016, 10:40 PM

Just picked up a 2012 535 Xdrive. having trouble finding the needed software to do coding. Seen some sites selling software for $50 and some for $15 just need. I was reading a older post and no one listed where to get software they kept it all in PM's

shawnsheridan · 02-18-2016, 06:07 AM

Quote:

Originally Posted by DaHeadlightGuy

Just picked up a 2012 535 Xdrive. having trouble finding the needed software to do coding. Seen some sites selling software for $50 and some for $15 just need. I was reading a older post and no one listed where to get software they kept it all in PM's

PM sent.

sunnytailor · 03-10-2016, 04:51 AM

Hi All,

I have sucessfully coded a few things on my 640D GC 2013 but i am strugging with a few

I cant seem to get cluster set to white at all time and i cant get my mirror to fold on one click. i have used the following

****************************************
SIDE MIRROR CLOSING W/ KEYFOB
****************************************
FRM / 3020 / ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> aktiv / Werte=01
CAS / 3003 / KOMFORTSCHLIESSUNG_FB -> activ / Werte=01
CAS / 3003 / KOMFORTSCHLIESSUNG_PA -> activ / Werte=01

****************************************
White Cluster at night
****************************************

KOMBI 3007 DIM_NACHT_EIN Werte: FF

thanks

igorsvrub · 03-10-2016, 06:06 AM

Quote:

Originally Posted by sunnytailor

Hi All,

I have sucessfully coded a few things on my 640D GC 2013 but i am strugging with a few

I cant seem to get cluster set to white at all time and i cant get my mirror to fold on one click. i have used the following

****************************************
SIDE MIRROR CLOSING W/ KEYFOB
****************************************
FRM / 3020 / ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> aktiv / Werte=01
CAS / 3003 / KOMFORTSCHLIESSUNG_FB -> activ / Werte=01
CAS / 3003 / KOMFORTSCHLIESSUNG_PA -> activ / Werte=01

****************************************
White Cluster at night
****************************************

KOMBI 3007 DIM_NACHT_EIN Werte: FF

thanks

Do not know if it helps...
I did coding on my f15 and side mirrors close with time delay(comfort access) about 2 seconds if I touch door handle but from key close by one touch.

igorsvrub · 03-10-2016, 06:13 AM

Just wondering if somebody did high frequency stop signals activation(when you push brake very hard it is blinking very frequently)?

ezaircon4jc · 03-10-2016, 10:54 PM

Quote:

Originally Posted by igorsvrub

Just wondering if somebody did high frequency stop signals activation(when you push brake very hard it is blinking very frequently)?

I did but I don't remember the specific code. I found most of the codes in an F30 forum. Here's what I used...

BEST_F10_CheatSheet_V3.0 (1) (1).pdf

BEST_F30_Coding_Reference_Guide_v1.7 (2).pdf

igorsvrub · 03-13-2016, 03:59 AM

Quote:

Originally Posted by ezaircon4jc

I did but I don't remember the specific code. I found most of the codes in an F30 forum. Here's what I used...

Attachment 1379950

Attachment 1379951

Thanx, but cheat sheet from f30 is suitable for f10?

ezaircon4jc · 03-13-2016, 10:36 PM

Quote:

Originally Posted by igorsvrub

Thanx, but cheat sheet from f30 is suitable for f10?

Yes.... I've all my coding using those lists.

sunnytailor · 03-15-2016, 07:04 AM

Quote:

Originally Posted by igorsvrub

Do not know if it helps...
I did coding on my f15 and side mirrors close with time delay(comfort access) about 2 seconds if I touch door handle but from key close by one touch.

Thanks this worked. i coded it to 00 and it did the trick.

The only one im stuggling with now is DIM_NACHT_EIN will not keep to FF it keeps reverting to 0A so i cant get white cluster at all times. i need to work out what is triggering it to change back

igorsvrub · 03-17-2016, 04:04 PM

Quote:

Originally Posted by sunnytailor

Thanks this worked. i coded it to 00 and it did the trick.

The only one im stuggling with now is DIM_NACHT_EIN will not keep to FF it keeps reverting to 0A so i cant get white cluster at all times. i need to work out what is triggering it to change back

This I did not code, so have no clue...

Bmw doubles · 03-25-2016, 02:42 PM

Quote:

Originally Posted by sunnytailor

Hi All,

I have sucessfully coded a few things on my 640D GC 2013 but i am strugging with a few

I cant seem to get cluster set to white at all time and i cant get my mirror to fold on one click. i have used the following

****************************************
SIDE MIRROR CLOSING W/ KEYFOB
****************************************
FRM / 3020 / ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> aktiv / Werte=01
CAS / 3003 / KOMFORTSCHLIESSUNG_FB -> activ / Werte=01
CAS / 3003 / KOMFORTSCHLIESSUNG_PA -> activ / Werte=01

****************************************
White Cluster at night
****************************************

KOMBI 3007 DIM_NACHT_EIN Werte: FF

thanks

Awesome! I was looking for the white cluster at night.

Badiiinfluence · 04-26-2016, 10:56 AM

Hi,

Im new to this forum and would like to code my 2013 f10. Anyone who can help me with the software and cheat sheet? I will greatly appreciate. Thanks

shawnsheridan · 04-26-2016, 11:26 AM

Quote:

Originally Posted by Badiiinfluence

Hi,

Im new to this forum and would like to code my 2013 f10. Anyone who can help me with the software and cheat sheet? I will greatly appreciate. Thanks

You cannot send or receive PM's yet. Send me one when you can.

tjwomer · 05-21-2016, 06:02 PM

Trying to code my 2013 F10 and I can't get the target to show anything. I verified that my e-sys is pointed at C:\Data. I am using a Microsoft Surface so I am having to use a Ethernet adaptor to plug in the cable. I have gone over the directions step by step 3 times already and cannot figure out how to connect to the car.

12-14-2014, 09:40 AM	#89
F10Thai New Member 3 Rep 23 Posts Drives: 530e G30 / 528i F10 Join Date: Jul 2012 Location: Thailand iTrader: (0)	Hi, Shawn I cannot find anything under JBBF as Originally Posted by shawnsheridan View Post JBBF => RLS_DEF_FLC_SCHWELLWERT_SATZ JBBF = >RLS_FLC_SCHWELLWERT_SATZ normal empfindlich = sensitive sehr_empfindlich = very sensitive unempfindlich = insensitive Is there any other way to adjust the sensitive of headlight sensor?
	Appreciate 0 Quote

12-19-2014, 01:50 AM	#91
ZAKSM3 Private First Class 23 Rep 113 Posts Drives: 16 M3, 15 X5 3.5d Join Date: Jul 2007 Location: Stuttgart iTrader: (0) Garage List 2016 M3 [0.00] 2015 X5 35d [5.00]	2011 528i Does anyone know if it is possible to code the headlight washers on and off on a 2011 528i? Thanks!
	Appreciate 0 Quote

12-19-2014, 06:16 AM	#93
ZAKSM3 Private First Class 23 Rep 113 Posts Drives: 16 M3, 15 X5 3.5d Join Date: Jul 2007 Location: Stuttgart iTrader: (0) Garage List 2016 M3 [0.00] 2015 X5 35d [5.00]	Thank you! I hate those damn headlight washers!
	Appreciate 0 Quote

12-21-2014, 08:14 AM	#94
Captain Monte New Member 0 Rep 5 Posts Drives: 2011 550i sport Join Date: Dec 2014 Location: Tampa florida iTrader: (0)	F10 coding tampa I just recently purchased a f10 550i. I was wondering if anyone does coding in the Tampa Bay Area. This is my first bmw with Idrive, I've just read about changing many options and this peaked my interest. Any info would be great.
	Appreciate 0 Quote

12-21-2014, 08:23 AM	#95
Captain Monte New Member 0 Rep 5 Posts Drives: 2011 550i sport Join Date: Dec 2014 Location: Tampa florida iTrader: (0)	Tampa coding I'm looking for someone in Tampa or around Tampa to do some coding. Any help would be great.
	Appreciate 0 Quote

01-23-2016, 05:23 PM	#96
Rieger Registered 0 Rep 3 Posts Drives: Bmw F10 Join Date: Oct 2015 Location: Portugal iTrader: (0)	H1 siren installed in my F11 and mirror with LED. How to enable LED blinking without DWA?
	Appreciate 0 Quote

02-17-2016, 10:40 PM	#97
DaHeadlightGuy Private 21 Rep 70 Posts Drives: 2013 DSB F10 Join Date: Feb 2016 Location: Indiana iTrader: (0)	Just picked up a 2012 535 Xdrive. having trouble finding the needed software to do coding. Seen some sites selling software for $50 and some for $15 just need. I was reading a older post and no one listed where to get software they kept it all in PM's
	Appreciate 0 Quote

03-10-2016, 04:51 AM	#99
sunnytailor New Member 9 Rep 26 Posts Drives: 2018 X5 4.0d MSport Join Date: Feb 2016 Location: UK iTrader: (0)	Hi All, I have sucessfully coded a few things on my 640D GC 2013 but i am strugging with a few I cant seem to get cluster set to white at all time and i cant get my mirror to fold on one click. i have used the following ************************************** SIDE MIRROR CLOSING W/ KEYFOB ************************************ FRM / 3020 / ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> aktiv / Werte=01 CAS / 3003 / KOMFORTSCHLIESSUNG_FB -> activ / Werte=01 CAS / 3003 / KOMFORTSCHLIESSUNG_PA -> activ / Werte=01 ************************************ White Cluster at night ************************************** KOMBI 3007 DIM_NACHT_EIN Werte: FF thanks
	Appreciate 1 Quote

03-10-2016, 06:13 AM	#101
igorsvrub Private First Class 29 Rep 193 Posts Drives: X5, 40d Join Date: Jan 2014 Location: Riga, Latvia iTrader: (0)	Just wondering if somebody did high frequency stop signals activation(when you push brake very hard it is blinking very frequently)? Last edited by igorsvrub; 03-10-2016 at 02:28 PM..
	Appreciate 0 Quote

04-26-2016, 10:56 AM	#108
Badiiinfluence New Member 0 Rep 17 Posts Drives: F10 Join Date: Apr 2016 Location: NYC iTrader: (0)	Hi, Im new to this forum and would like to code my 2013 f10. Anyone who can help me with the software and cheat sheet? I will greatly appreciate. Thanks
	Appreciate 0 Quote

05-21-2016, 06:02 PM	#110
tjwomer New Member 3 Rep 15 Posts Drives: 2013 535i Join Date: May 2016 Location: Denton, TX iTrader: (0)	Trying to code my 2013 F10 and I can't get the target to show anything. I verified that my e-sys is pointed at C:\Data. I am using a Microsoft Surface so I am having to use a Ethernet adaptor to plug in the cable. I have gone over the directions step by step 3 times already and cannot figure out how to connect to the car.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search