|
|
12-11-2019, 03:23 PM | #1 |
Enlisted Member
6
Rep 33
Posts |
Eibach Lowering Spring
I can't seem to find Eibach Pro-kit lowering spring for my 2016 535D. Can I use lowering spring from 535i to fit 535D? Is it the same lowering height for 535i and 535D when using Eibach spring from 535i?
|
01-18-2020, 09:41 PM | #2 |
Captain
207
Rep 648
Posts |
No sir. Your diesel engine is significantly heavier than the non-diesels. If you were to put 535i springs on your car, the front end would squat much lower than the springs were designed to ride. I think it would be easier to compensate for this with a quality set of coilovers, rather than non-diesel springs. Hope that helps
__________________
I'm on the YouTubez now!! Check it out -> https://www.youtube.com/@turbospool
11' M-sport- 371 WHP-478 WTQ on stock PWG// DYNO COMING FOR Shuenk N55+ on 91oct/ BHP Intake/ IC/ CP/ DP/ Valved Mufflers/ David Shoup Tuning/ B58 Coils+N20 NGKs/ Walbro 450/ Helix OD/ xHP3/ G12 Brembos |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|