|
|
|
2010 2011 BMW 5 Series Forum F10 RPI M5 axle back custom made for F10 550 - $800 |
|
Post Reply |
|
Thread Tools | Search this Thread |
04-10-2015, 11:29 PM | #1 |
Major General
5343
Rep 8,774
Posts |
RPI M5 axle back custom made for F10 550 - $800
I bought the axle back RPI system direct and I had ACM custom fabricate the piping needed to make it work on the 550. Should fit 535 as well. You will need the M5 rear diffuser to make this work. I can include this for $200 more and it is painted gloss black.
$800 for the RPI axle back $200 for the OEM M5 Diffuser painted gloss black Local pick up only. Not going to ship this. Located in Brooklyn NY email me at akl007@msn.com Thanks, Alan
__________________
|
04-22-2015, 05:04 PM | #2 | |
New Member
0
Rep 24
Posts |
Quote:
|
|
Appreciate
0
|
04-23-2015, 04:18 PM | #5 |
Major General
5343
Rep 8,774
Posts |
Not on my car. Its hard to capture it with the iphone since it think the exhaust is background noise and it filters it out. Look up the RPI GTS exhaust for the M5 to give you an idea of how it sounds. Its not identical to that but close.
__________________
|
Appreciate
0
|
04-27-2015, 01:57 PM | #8 |
Major General
5343
Rep 8,774
Posts |
stock pipes will need to be cut and you need to weld this back on. Factory exhaust is one piece all the way from the front to back so cutting/welding is required for all exhausts. Should be a sub $100 job at any shop to do this.
__________________
|
Appreciate
0
|
05-08-2015, 11:52 PM | #9 |
Major General
5343
Rep 8,774
Posts |
Actual pics taken today after i cleaned up the exhaust.
Need this gone. $700 for the exhaust! I will throw in the oem M5 diffuser for $100 so $800 if you take both! Local pick up only How it looked installed on my car with the oem M5 diffuser which is also for sale for $200 (painted gloss black)
__________________
Last edited by Alan l.; 05-09-2015 at 12:03 AM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|