|
|
|
2010 2011 BMW 5 Series Forum F10 Replaced all eight spark plugs |
|
Post Reply |
|
Thread Tools | Search this Thread |
10-01-2015, 11:56 AM | #45 | |
ZEROdoubleZERO
228
Rep 659
Posts |
Quote:
|
|
Appreciate
0
|
10-01-2015, 12:03 PM | #46 | ||
Captain
106
Rep 736
Posts |
Quote:
|
||
Appreciate
0
|
10-01-2015, 03:40 PM | #48 |
ZEROdoubleZERO
228
Rep 659
Posts |
|
Appreciate
0
|
10-01-2015, 08:13 PM | #49 |
ZEROdoubleZERO
228
Rep 659
Posts |
I can only add 1 pic at a time and I'm not covering the easy parts like removing and reinstalling the plugs. This will only help you get acces to the coil packs and then to the plugs.
You will need a thin walled bmw spark plug socket for these pugs, I used a 15mm that I had to grind down to make it fit. |
Appreciate
0
|
10-01-2015, 11:04 PM | #51 |
ZEROdoubleZERO
228
Rep 659
Posts |
First you remove the air box...
You remove the bmw engine cover it just unsnaps, then loosen the hose clamps on the air box inlet and then up clip the retainer on the front of air box where the Orange rubber mount is. |
Appreciate
0
|
10-01-2015, 11:05 PM | #52 |
ZEROdoubleZERO
228
Rep 659
Posts |
This is the front hold down clamp and orange rubber mounting point
There are no other bolts, screws holding the air box in Last edited by Teddylongtooth; 10-01-2015 at 11:27 PM.. |
Appreciate
0
|
10-01-2015, 11:10 PM | #54 |
ZEROdoubleZERO
228
Rep 659
Posts |
Then remove air box pull up to unsnap from mounting points and you'll have to maneuver it back and up to get it to detach from air inlet ducting.....
|
Appreciate
0
|
10-01-2015, 11:14 PM | #55 |
ZEROdoubleZERO
228
Rep 659
Posts |
Next remove coil from what ever plug you want to start with, I did mine one at a time and started in the middle
To unhook plug from coil just lift up on left side and the plug slides out to the left |
Appreciate
0
|
10-01-2015, 11:23 PM | #59 |
ZEROdoubleZERO
228
Rep 659
Posts |
Next remove plugs and replace with new. I took my air box apart and removed charcoal filters while I had them out. I also shook out my air filters to rid them of dirt and debris.
FYI, My plugs came already gapped. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|