What did you do to your 5 series today?

asian · 06-28-2020, 07:14 PM

Quote:

Originally Posted by avram96

Powder-coated the wheels black! I know the car is dirty but it's been raining a lot so I haven't had the chance to clean it.

Literally night and day difference! Nice!

Tevzadze2.0 · 06-29-2020, 10:24 AM

Seibon carbon lip lsturbointeg . You inspired me !!

lsturbointeg · 06-29-2020, 07:21 PM

Quote:

Originally Posted by Tevzadze2.0

Seibon carbon lip lsturbointeg . You inspired me !!

That looks freakin amazing! Glad I inspired you

ramman434 · 06-30-2020, 09:53 AM

Bad pic, but got my eBay strut tower brace installed last night.
I'm all stock so I can definitely feel the difference

lsturbointeg · 06-30-2020, 02:07 PM

Quote:

Originally Posted by ramman434

Bad pic, but got my eBay strut tower brace installed last night.
I'm all stock so I can definitely feel the difference

I replied on your other post but I'm glad you didn't run into any issues. Glad you can feel a difference. I'm sitting really low on my KW's and like I mentioned on my review feel a very good improvement that I do not feel the need to upgrade my sways

4Romie · 06-30-2020, 10:34 PM

My Charge pipe blown up
and a new one from VRSF not available until 7/58/20

lsturbointeg · 06-30-2020, 10:55 PM

Quote:

Originally Posted by 4Romie

My Charge pipe blown up
and a new one from VRSF not available until 7/58/20

can you elaborate how and why? tune? stock? were you in boost? pictures?

ramman434 · 07-01-2020, 07:42 AM

Quote:

Originally Posted by 4Romie

My Charge pipe blown up
and a new one from VRSF not available until 7/58/20

Sorry to hear that man. My in-laws live in Lake Worth. Maybe I'll run across you one day. They're just south of Lake Ave.

4Romie · 07-01-2020, 06:30 PM

Quote:

Originally Posted by lsturbointeg

can you elaborate how and why? tune? stock? were you in boost? pictures?

I have a stock engine and I was on the freeway and car started jerking and losing power. I made it home popped the hood and notice a hole in the charge pipe. basically the base that attaches the Map sensor to the charge pipe blew off.
it was a clean separation so I supper glued the base back on.
its holding but taking no chances and parked it waiting on parts.
Not availed until 7/28/20

4Romie · 07-01-2020, 06:41 PM

Quote:

Originally Posted by ramman434

Sorry to hear that man. My in-laws live in Lake Worth. Maybe I'll run across you one day. They're just south of Lake Ave.

Floridabimmers had meet last Sunday at the Palm Beach Outlet
did you make it?

Sylverlee · 07-02-2020, 12:20 AM

Quote:

Originally Posted by 4Romie

Floridabimmers had meet last Sunday at the Palm Beach Outlet
did you make it?

Ooh do you have more photos of the 343 wheels with red caliper?

Postman805 · 07-02-2020, 07:52 PM

New wheels on the f10. Went with sportline 8s 19x8.5 et35 front 245/40 pilot sport a/3s+ 19x10 et35 285/35 rear.
wasn’t sure if i should go silver or gunmetal but i’m happy with my choice.
I haven’t seen many f10s with csl style wheels. These are flow formed so they’re super light weight and stronger than fully cast wheels. Just under 22 pounds up front and about 23 for the rears.
Name: 852EA39F-A225-4382-838E-E9A617C07A0D.jpeg
Views: 594
Size: 190.8 KB

Name: 852EA39F-A225-4382-838E-E9A617C07A0D.jpeg
Views: 594
Size: 190.8 KB

Name: 72A372E7-E64E-4982-A859-BF585AD3A420.jpg
Views: 641
Size: 593.3 KB

Name: 258851D3-E5FD-4E77-BC04-9DE34C5DC632.jpg
Views: 610
Size: 292.3 KB

Name: CF02540F-8B3E-4DFE-8464-5D6017068AD8.jpeg
Views: 583
Size: 144.4 KB

Name: 110F0B7B-6C85-43B8-B42D-E6EFA0B5F663.jpeg
Views: 575
Size: 155.3 KB

Name: 5B2A1789-ADB5-4BB1-A05C-FF941043E83C.jpeg
Views: 603
Size: 226.6 KB

Name: C11EC200-18D4-427F-A3CE-94A86C81B9F9.jpg
Views: 640
Size: 165.0 KB

Name: 251A676C-75DA-4A80-8A38-6D4870DC4A22.jpeg
Views: 616
Size: 132.2 KB

JQ · 07-02-2020, 08:10 PM

Morning cruise

Tevzadze2.0 · 07-05-2020, 02:23 AM

Powder coated my wheels chrome bronze and loving it

al_breezy535i · 07-05-2020, 03:26 AM

Quote:

Originally Posted by lsturbointeg

wanted to check how the oil catch was doing even tho i've only put maybe around 400 miles? here's how accessible the catch can is. very easy to unscrew and empty out if need be

as you can see just a slight residue

Bro you have a link where I can buy it ?

lsturbointeg · 07-05-2020, 07:32 AM

Quote:

Originally Posted by Tevzadze2.0

Powder coated my wheels chrome bronze and loving it

Awesome! We need more pictures bro!

lsturbointeg · 07-05-2020, 07:36 AM

Quote:

Originally Posted by al_breezy535i

Bro you have a link where I can buy it ?

https://www.ebay.com/itm/EVIL-ENERGY...wAAOSwFy9euptp

ramman434 · 07-08-2020, 12:13 PM

Quote:

Originally Posted by 4Romie

Floridabimmers had meet last Sunday at the Palm Beach Outlet
did you make it?

That's a negative, ghost-rider. I'm down in Pompano Beach, and don't come up there too often. This is also the 1st I'm hearing of "Floridabimmers".

I was in Nashville(where I'm from) all weekend for the 4th of July visiting family. Would love to know when the next meet up is.

al_breezy535i · 07-12-2020, 03:26 AM

Quote:

Originally Posted by lsturbointeg

Quote:

Originally Posted by al_breezy535i

Bro you have a link where I can buy it ?

https://www.ebay.com/itm/EVIL-ENERGY...wAAOSwFy9euptp

That one is sold out 😢

SikhBMW · 07-15-2020, 04:04 PM

Well I did it... Muffler delete and tips added and oh boy do I love the sound. Next up custom diffuser and clean up the cuts.

lsturbointeg · 07-15-2020, 07:26 PM

Quote:

Originally Posted by al_breezy535i

That one is sold out ��

they sell it all over Ebay under different sellers

even Amazon sells it

Quote:

Originally Posted by SikhBMW

Well I did it... Muffler delete and tips added and oh boy do I love the sound. Next up custom diffuser and clean up the cuts.

Bro, you should have done the diffuser first as you may end up readjusting your tips to fit the new diffuser

Ickdeep · 07-16-2020, 12:41 AM

Joining that forged carbon wave.

06-29-2020, 10:24 AM	#1938
Tevzadze2.0 Enlisted Member 47 Rep 46 Posts Drives: 2011 Bmw 535 xi Join Date: Dec 2017 Location: Washington DC iTrader: (0)	Seibon carbon lip lsturbointeg . You inspired me !! Attached Images
	Appreciate 3 ezaircon4jc4450.50 lsturbointeg9152.50 Ickdeep5717.50 Quote

06-30-2020, 09:53 AM	#1940
ramman434 Lieutenant 712 Rep 538 Posts Drives: F30 335i Join Date: Dec 2012 Location: Fort Lauderdale, FL iTrader: (0)	Bad pic, but got my eBay strut tower brace installed last night. I'm all stock so I can definitely feel the difference Attached Images __________________ '07 Montego Blue/Saddle Brown E92 335i - 6spd. - SOLD '16 Carbon Black Metallic F10 535i M-Sport - TOTALED 11/21/21 '13 Black Sapphire Metallic F30 335i M-Sport - unknown charge pipe, MSport Exhaust, 20" 405M wheels, $61k MSRP, CF M4 Mirror caps & Spoiler, NGK plugs, Dinan Coils, BMS intake
	Appreciate 1 Ickdeep5717.50 Quote

06-30-2020, 10:34 PM	#1942
4Romie Private 112 Rep 68 Posts Drives: 2013 F10 535I / Lime Rock M3 Join Date: May 2016 Location: Lake Worth Florida iTrader: (0) Garage List 2013 BMW M3 [0.00] 2013 BMW 535 [0.00]	My Charge pipe blown up and a new one from VRSF not available until 7/58/20
	Appreciate 0 Quote

07-02-2020, 07:52 PM	#1948
Postman805 New Member 21 Rep 10 Posts Drives: BMW 535i Join Date: Sep 2019 Location: CA iTrader: (0) Garage List 2012 BMW 535i [0.00]	New wheels on the f10. Went with sportline 8s 19x8.5 et35 front 245/40 pilot sport a/3s+ 19x10 et35 285/35 rear. wasn’t sure if i should go silver or gunmetal but i’m happy with my choice. I haven’t seen many f10s with csl style wheels. These are flow formed so they’re super light weight and stronger than fully cast wheels. Just under 22 pounds up front and about 23 for the rears.
	Appreciate 4 lsturbointeg9152.50 ezaircon4jc4450.50 Ickdeep5717.50 r2dmax58.00 Quote

07-02-2020, 08:10 PM	#1949
JQ Registered 9 Rep 3 Posts Drives: F10 Join Date: Jul 2020 Location: Hong Kong iTrader: (0)	Morning cruise Attached Images
	Appreciate 5 lsturbointeg9152.50 ezaircon4jc4450.50 Ulisse37.00 Ickdeep5717.50 r2dmax58.00 Quote

07-05-2020, 02:23 AM	#1950
Tevzadze2.0 Enlisted Member 47 Rep 46 Posts Drives: 2011 Bmw 535 xi Join Date: Dec 2017 Location: Washington DC iTrader: (0)	Powder coated my wheels chrome bronze and loving it Attached Images
	Appreciate 5 lsturbointeg9152.50 cdmulders325.00 ezaircon4jc4450.50 Ickdeep5717.50 r2dmax58.00 Quote

07-15-2020, 04:04 PM	#1956
SikhBMW Private 52 Rep 92 Posts Drives: 2016 bmw x5 xdrive40e Join Date: Aug 2019 Location: PA iTrader: (0)	Well I did it... Muffler delete and tips added and oh boy do I love the sound. Next up custom diffuser and clean up the cuts. Attached Images
	Appreciate 3 ezaircon4jc4450.50 lsturbointeg9152.50 Ickdeep5717.50 Quote

07-16-2020, 12:41 AM	#1958
Ickdeep Brigadier General 5718 Rep 4,209 Posts Drives: '13 F10 M5 \| '15 F15 X5 Join Date: Jul 2015 Location: Seattle, WA iTrader: (3) Garage List 2015 BMW X5 [10.00] 2013 BMW M5 [SOLD] [10.00] 2013 BMW 535i [SOLD] [10.00]	Joining that forged carbon wave. Attached Images __________________ Stage 2 Tune BPM \| Fabworx DP \| SSP Performance Clutch \| Muffler & Resonator Delete Dinan Adjustable Springs \| Powder Coated 343 Wheels \| F&R Spacers \| RW Carbon Front Lip & Diffuser Sold!
	Appreciate 4 lsturbointeg9152.50 ChampagneQrtzPapi49.00 Gjohnson7255.00 ezaircon4jc4450.50 Quote