[Dahigi777]

My MAF sensor wiring connector is broken. Is it possible to get a new connector, maybe a with a pigtail, and cut the old one off and solder the new one on? I've been searching for hours for replacement parts and havent found anything other than the ENTIRE engine wiring harness. Does anyone know how to solve problems like this?

[BimmerHausPerformance]

Junk yard, Ebay?

I'm looking for the little orange gasket that goes around that plug too... not sure if that's available on it's own.

[Supahone]

3.5 Bar TMAP - TMAP Sensors & PNP Adapters | Turner Motorsport
https://www.turnermotorsport.com/p-5...-pnp-adapters/

It looks like this could be spliced in.

[Supahone]

Also sometimes these plugs have part numbers on them and you can pick them up from electronic sub vendors.

[Trainwreck914]

I have swapped connectors on my jb4. It came with B harness and I needed A. Those are A in the picture. Do you need the male or female side? I'm guessing male. I have the part number for the male from Bmw. Cost is around $7. And it comes with the red rubber gasket. But it's blue in color. Not black. The female is almost impossible to find. I had to get the female from a Bmw motorcycle part. Give me a minute I'll find the part #

[Trainwreck914]

I tried to order from auto click U.K. or something like that. They have been on back order/out of stock forever. They have the hirschmann. Which is oem anyway.

[Dahigi777]

Originally Posted by Trainwreck914

I have swapped connectors on my jb4. It came with B harness and I needed A. Those are A in the picture. Do you need the male or female side? I'm guessing male. I have the part number for the male from Bmw. Cost is around $7. And it comes with the red rubber gasket. But it's blue in color. Not black. The female is almost impossible to find. I had to get the female from a Bmw motorcycle part. Give me a minute I'll find the part #

I need the male side! When you get it from BMW does it come with a pigtail of any sort?

[Trainwreck914]

No pigtail