|
|
|
2010 2011 BMW 5 Series Forum F10 K2 led headlights need help!!! |
|
Post Reply |
|
Thread Tools | Search this Thread |
03-19-2024, 06:31 PM | #1 |
New Member
8
Rep 29
Posts |
K2 led headlights need help!!!
Ok so I purchased second some led replica headlights from k2 industries. The site offered a LCI version but stated that they were for Asian spec BMWs but will fit with some minor pin moving and coding…When I messaged them to see if they had instructions or info on how to make the headlights work they did not have any info to give. I reached out to a remote coder who tried helping me but I haven’t heard back from him.
I took the car apart and installed the headlights. Here are the issues I came across: Issue 1: when plugged in the angel eyes power on immediately and stay on… they do not turn off at all so that’s a huge issue obviously. Issue 2: when the car is turned on the high and low beam turns on and stay on together with no way of turning off high beams. - Turn signals work as they should Everything functions except the guy who I spoke with that does remote coding couldn’t get the headlights working properly. He said I may have to move some wiring around. Going to post pics below of the headlight pins of the original headlights and the replica LED headlights along with the wiring harness. Any help would be much appreciated. -first 2 headlight pics are of the Replica lights (Asian spec) - Harness of the driverside headlight - last pics are of the oem headlights (US spec) If someone can provide me with the wiring diagram of the US and the Asian spec LCI headlights so I can see what pins to move maybe I can actually get these things to work 👍🏼 |
05-21-2024, 08:54 PM | #2 |
Private First Class
29
Rep 135
Posts |
send me a PM, i will help you
__________________
F30 : 322, 323, 3AG, 508, 6WB, Full System Bowers Wilkins, ID6 with CID Touch, RSE ID6
G05 : 2VW, 2VH, 3AK, 3E3, 5AU, 5AR, 5DN, 6F1, 610, 7M9 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|