|
|
|
2010 2011 BMW 5 Series Forum F10 N55 Starter Replacement now crank but no start |
|
Post Reply |
|
Thread Tools | Search this Thread |
02-21-2019, 09:56 AM | #1 |
Registered
0
Rep 1
Posts |
N55 Starter Replacement now crank but no start
Bimmer Team, I replaced the factory starter with a non OEM starter, the car will crank has 12.6v but does not start. The car is 2011 F10 with 90k and the message I get is drive train faulty. I have rechecked the connections and work performed yesterday. Austin, TX BMW says service is available 3/4... any help on common mistakes when changing a starter? Also when checking the hidden menu no error codes are present. the car craks but does not start. I was thinking surely there would be an error code.
Last edited by Topher Tuff; 02-21-2019 at 01:27 PM.. |
10-02-2019, 02:04 PM | #5 |
Registered
0
Rep 1
Posts |
sorry for very latent response ended up taking battery connections off and re-seating all connections to the ECU around the manifold and that was the ticket to success. this happened the next morning when I could see fully. thank you for the reply
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|