|
|
|
2010 2011 BMW 5 Series Forum F10 LED Reverse Lights Upgrade Error |
|
Post Reply |
|
Thread Tools | Search this Thread |
04-01-2020, 12:59 PM | #1 |
New Member
1
Rep 5
Posts |
LED Reverse Lights Upgrade Error
So After changing my Reverse lights to LED, I got This Error
Now After Modifying this Values and setting them to activ I code FDL And Get this Error And This Errors in The Car (Just ignore the RPA and Driving stabilization failure ) So what I do next is Just press This Code button And All of the errors are gone But after hitting reverse the error shows up again I coded DSC AND EMF With no Errors Only FRM I get This Errors So Anyone Knows What's the Problem I am using A Macbook Pro And Parallels Windows 10 ESYS 3.30.1 And E-Sys Launcher PRO v2.8.1 Thanks in Advance UPDATE : I Connected my OEM Reverse lights and tried to code (Opening doors will not interrupt window roll-up) IN FRM And got the same Errors So it's not my LED reverse light I think there is something wrong with my FRM module did anyone had this problem before Last edited by The King 464; 04-02-2020 at 08:10 AM.. Reason: UPDATE |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|