[deltacossigma]

Hi All,

After successfully retrofitting 2TB I have finally gathered the courage to take one step further and retrofit the reversing camera 3AG.

I have source most of the hardware but am struggling to find the wiring diagrams (still need to buy the wiring)

I have seen an F30 OEM retrofit guide but haven't been able to find the F10 OEM retrofit guide.

Can anyone help? or Can someone pull some wiring info from ISTA please? I cant seem to be able to find a ISATA link either.

Any help is much appreciated.

[wcr3d]

Try here.
www.newtis.info

[deltacossigma]

Originally Posted by wcr3d

Try here.
www.newtis.info

This is soooooo awesome. Thank you very much.

[wcr3d]

You're welcome.
Another site to mark. Very good for part numbers.
www.realoem.com

[deltacossigma]

Originally Posted by wcr3d

You're welcome.
Another site to mark. Very good for part numbers.
www.realoem.com

Yes that is very good one indeed. I used to confirm all the hardware that I bought..

Thanks to your previous suggestion. I just confirmed all the required cables and have placed the order. Should be here in a week.

Do you have any idea about the retrofit.. Do I just need to VO code the 3AG ?

Found another forum which seems to have some very good info but the original poster was running into some errors as well (not sure if I am allowed to post links to other forums??)

[n3985]

If you are doing a full OEM retrofit please document your process, part numbers, coding needed, will be good resource for anyone else looking.

[wcr3d]

Originally Posted by deltacossigma

Yes that is very good one indeed. I used to confirm all the hardware that I bought..

Thanks to your previous suggestion. I just confirmed all the required cables and have placed the order. Should be here in a week.

Do you have any idea about the retrofit.. Do I just need to VO code the 3AG ?

Found another forum which seems to have some very good info but the original poster was running into some errors as well (not sure if I am allowed to post links to other forums??)

That is something i don't know.
There is a coding sub forum for that type of information.

[deltacossigma]

Originally Posted by n3985

If you are doing a full OEM retrofit please document your process, part numbers, coding needed, will be good resource for anyone else looking.

Will definitely try my best. Though I am not very disciplined when it comes to documenting but I think this retrofit can do with one

[deltacossigma]

Originally Posted by wcr3d

That is something i don't know.
There is a coding sub forum for that type of information.

[deltacossigma]

Received the cables. if weather permits, I should be able to make some progress with the install this weekend.