|
|
|
2010 2011 BMW 5 Series Forum F10 10.5 front wheels on m5 fenders correct offsets |
|
Post Reply |
|
Thread Tools | Search this Thread |
06-23-2015, 06:37 AM | #1 |
Enlisted Member
20
Rep 41
Posts |
10.5 front wheels on m5 fenders correct offsets
hi guys
i was running with m tech fenders on avandgarde 21x9 et35 m510 with 255/30/21 tire setup on front, i buyed aftermarket m5 bumpers with fenders to make conversion and now wheels are 2.5 cm inside fender. i want to buy one pair rear wheels and run 21x10.5 et38 all arround. i don't want to use spacer for front tires because rears are nicer and concave. thanks. Last edited by ismet; 06-23-2015 at 07:00 AM.. |
06-23-2015, 07:19 AM | #3 |
New Member
15
Rep 29
Posts |
I think oem m5 fenders should be much wider than 1.6mm each side...
i run 10.5 et20 with oem m-package I dont know if You swapped front axle component from m5... if not, with oem m5 fenders et0 should be okay! |
Appreciate
0
|
06-23-2015, 07:59 AM | #4 |
Enlisted Member
20
Rep 41
Posts |
i am running with std front axle so 18mm spacers witll be ok with 10.5'' wide et38 wheels. which means it will stick out 35 mm farther and will be 5mm closer to suspention. are you running with adj camber? do you have more photos. what is your tire size?
|
Appreciate
0
|
06-23-2015, 11:04 PM | #5 |
Lieutenant General
9191
Rep 14,521
Posts |
So your rears are 10.5 already. Are you gonna order the same one's and try to see if it fits? Any issues doing this? Love what ur doing with the conversion! I'm ordering the same 21" wheels but like yours, the front is flat and not concave. U think running the rears in the front will cause any type of issues?
|
Appreciate
0
|
06-24-2015, 01:55 AM | #6 | |
New Member
15
Rep 29
Posts |
Quote:
i'm running stock control arms, camber is adjusting by itself, which is pretty awesome 255/30 on front, 265/30 rears here You can check out my car: http://*******************/blog/2015...zs-f11-touring |
|
Appreciate
0
|
06-24-2015, 05:40 AM | #7 | |
Enlisted Member
20
Rep 41
Posts |
Quote:
this is rear wheel on front with 16mm spacer total of 10.5'' et22 Last edited by ismet; 06-24-2015 at 06:38 AM.. |
|
Appreciate
0
|
06-24-2015, 07:18 AM | #8 |
Lieutenant General
9191
Rep 14,521
Posts |
ismet... So these pictures r the rears in the front now? Is it clearing all suspension parts? So the other picture with the normal fender is that the same offset as the rear tire or ur not sure? Like u I'm trying to accomplish the same concave look but keeping my standard fenders and not the M5. I'm trying to do some research if running this will cause any handling issues or safety or if it puts any improper wear on the front tires?
|
Appreciate
0
|
06-24-2015, 08:08 AM | #9 | |
Lieutenant General
9191
Rep 14,521
Posts |
Quote:
|
|
Appreciate
0
|
06-24-2015, 08:24 AM | #10 | |
Enlisted Member
20
Rep 41
Posts |
Quote:
polonez is running with std fenders same setup front is 9x21 et35 rear is 10.5x21 et38 |
|
Appreciate
0
|
06-24-2015, 09:23 AM | #11 |
Lieutenant General
9191
Rep 14,521
Posts |
ismet... when u order the new front wheels what are u gonna request for? Same as the rear or will advant garde give you a custom offset for the front? Before I place my order I'm trying to get the right Setup So I wasn't sure if I should just tell them to give me the same setup for the rears for the fronts as well and run the 16mm spacer? Or if they can give me the right offset without running the spacer?
Last edited by lsturbointeg; 06-24-2015 at 09:29 AM.. |
Appreciate
0
|
06-24-2015, 10:27 AM | #12 | |
Enlisted Member
20
Rep 41
Posts |
Quote:
|
|
Appreciate
1
|
06-24-2015, 11:33 AM | #13 |
Lieutenant General
9191
Rep 14,521
Posts |
Thanks! I read all offsets are already set to make and model. So I guess the only way to achieve this is like what u said...order all 4 the same and add spaces. Did u have to extend the lugs? Last question is 255 on a 10.5" is gonna have a stretched look?
|
Appreciate
0
|
06-24-2015, 01:28 PM | #14 | |
Lieutenant General
9191
Rep 14,521
Posts |
Quote:
|
|
Appreciate
0
|
06-24-2015, 01:48 PM | #15 |
New Member
15
Rep 29
Posts |
as on the picture:
Ismet - i think you should have said, that you're installing aftermarket parts, which are not as wide as oem m5 fenders... that would make our advices easier |
Appreciate
0
|
06-24-2015, 04:34 PM | #16 |
Lieutenant General
9191
Rep 14,521
Posts |
Awesome! OK So just to clarify rears are as is but what should I be asking for the fronts just to settle this confusion LOL! I mean it's going to be 10.5 but et and I'm assuming a front spacer?
|
Appreciate
0
|
06-27-2015, 04:18 PM | #17 | |
Lieutenant General
9191
Rep 14,521
Posts |
Quote:
|
|
Appreciate
0
|
06-29-2015, 12:46 AM | #19 |
Enlisted Member
20
Rep 41
Posts |
i ordered them, hopefully will have in 3 days. will install them with my old 255 30 21 tires. will post photos as soon as i have them on.
i am planning to have kw2 coilovers too. OEMonsterz 2 inc wider? 1 inc each side right? here is what i found says 31 mm in total From the BMW UK website: M5 Width - 1891mm, Track front - 1627mm, Track rear - 1582mm F10 Width - 1860mm, Track front - 1600mm, Track rear - 1627mm |
Appreciate
0
|
07-01-2015, 03:19 AM | #22 |
Lieutenant General
9191
Rep 14,521
Posts |
Looks really good ismet! I was gonna go for it but not sure of running a 255 on a 10.5 is gonna look? Maybe too much stretch post some pix when u get them!
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|