[550iFreak]

BIMMERPOST / Classifieds

Asking Price:

Sold

Item Interest

Update: price is set for 700 dollars for everything shown on the listing that is available on here. This price is SHIPPED TO THE USA.

International people will need a shipping quote and an agreed out the door sale price.

So I have set a true number on the price shipped.






Hello,
So I finally made the executive decision of trading my car in. After many memories and work I put into the car, this is probably one of the most painful things I will experience ( of course there was worse such as death in the family, etc).

I pulled all of these parts off the car prior trading it in to allow others to keep them alive on their cars and enjoy as much as I did.

My car was a 2011 550i, 6 Spd manual and it had 133,500 miles prior its departure. Most of these parts were installed in increments of its life and each part will reflect when they were put on. Some of the parts are also brand new/never used or has so little miles that they could be considered new.

Each part price are slightly negotiable and does NOT include shipping. We will have to discuss shipping options if you are interested in part(s). Package deals are also acceptable if both parties comes to an agreement.

If you reside locally from myself (Daytona Beach, FL), negotiations can be held much better and no shipping cost will be resulted. I do go to Orlando, Deltona, Palm coast and surrounding areas so if you live anywhere within the limits, we can definitely work something out.

Sorry for the long introduction, it was a really rough week for me so bear with me. So here we go:




1. Alpina Turbochargers Price: Make an offer

These turbos were used for about 10k miles. Never abused, did what they were intended to do. No oil burning or issues reported while in use. Makes awesome sounds and really woke the car up. You'll need to supply the diverter valves.


4. 02 sensors Price: Make an offer
These oxygen sensors are the VERY EXPENSIVE pre cat Wideband OEM sensors by Bosch. Each sensor is almost 200 bucks and I replaced them at the time while I was using the car. These sensors only has 2,000 miles ( yes I mean it, no typo here guys!) I luckily kept the old 02 sensors and they are placed back onto the car since these new ones helped with finer tuning with the JB4.
*Again, these only has 2,000 miles before removal so they are practically brand new so if you have over 100k miles, change them out with these for a peace of mind or if you want to escalate the refinement of your tunes!*

5.HPFP Price: Make an offer
Bought them brand new from a reputable store as spares in case mine would fail. They never failed so they were never used. Still in packages.

11. F10 550i rear calipers and carriers price: Make an offer
Worked great before pulled. Want to upgrade your rears to 550i braking? or just replace the ones that needs work? Get these and a cheap price and it is complete with EPB (electronic Parking brake.)

14. Alpina diverter valves price: Included with turbos
One works and one doesn't. I will include a brand new in the box STOCK diverter valve. We can separate if needed.


Pics are in the next post. Thank you and contact me with any questions!

[550iFreak]

Pics as shown

[txoid]

Interested in the door sills. Can you send me a picture?

[550iFreak]

Sure thing, just pm me your # and I’ll get on it.

[TN550i]

Interested in hpfps

[BimmerHausPerformance]

Pm sent

[550iFreak]

Attached pics of the door sills. Grade is 8.5/10 since there are minor defects. The defects won’t be visible once installed in the car and considered as a wear item.

[550iFreak]

Txoid is first in line for the sills followed by browbmw in terms of reply times.

Let me know via pm if interested.

[550iFreak]

TN550i
I noticed that your profile states that you drive a 2014 550i. If it is, please be advised that the HPFP may NOT fit your car since you may have the N63TU engine. The HPFP I have here are for the early N63 and they are shaped differently.

[550iFreak]

UPDATE:

Door sills SOLD to Txoid

///M shift knob SOLD to BrowBMW

Steering Wheel PENDING

[Chemical X]

Do you have pictures of when the cold air intake was installed?

[JV_135i]

PM sent for sunshade and license frame

[550iFreak]

PM received for jv_135

And to chemical x, unfortunately I do not and I kick myself for not doing so. I followed a fellow member here on the DIY intake so I made my own. The pipe work follows exactly how you follow on the stock air box ductwork but you’ll have to put the cone filters behind the grille.

[Encendido3]

PM sent for sunshade and plate frame

[550iFreak]

Update:
Close up pictures on license pate trim and sunshade per request of jv_135.
Encendido is next in line if jv declines.

Currently pending on these two items.

Steering wheel is back up for sale.

[550iFreak]

Update:
Sold items are successfully shipped.

[BimmerHausPerformance]

Originally Posted by 550iFreak

Update:
Sold items are successfully shipped.

Lol ty

[Vince535]

Is the sunshade still available?

[550iFreak]

Lol you’re welcome browbmw, I didn’t catch your name so that’s how I addressed it to you lol.

The sunshade is packaged, ready to ship but I’m still waiting on the first person for response. Encendido was second in line and responsive so I will give the first one a courtesy check.

[550iFreak]

Update:
Sunshade is now sold!

And those who lives in Florida, be safe out there for Elsa!

[550iFreak]

Update:

Sunshade and license plate holder sold and shipped.

[Encendido3]

Originally Posted by 550iFreak

Update:

Sunshade and license plate holder sold and shipped.

Got the package! Thanks again!