What did you do to your 5 series today?

ALPWhite · 05-20-2017, 06:13 AM

Quote:

Originally Posted by fromwrxto330ci

Update

vpatel867 · 05-20-2017, 07:42 AM

Quote:

Originally Posted by fromwrxto330ci

Update

Nice. I need that front lip.

ItBloo · 05-20-2017, 12:57 PM

Quote:

Originally Posted by fromwrxto330ci

Update

Hella wide!!!!

lsturbointeg · 05-20-2017, 01:16 PM

Quote:

Originally Posted by fromwrxto330ci

Update

Damn! That looks pretty damn good!

Are you planning on running a big wing?

Tasmanian · 05-20-2017, 04:10 PM

Took me 3 hours, but installed rear mudflaps today.

The are the official BMW version. had to make a few adjustments and drilling to get the rigth rear one to fit.

Tasmanian

essjon · 05-22-2017, 10:36 AM

Thanks fellas!

Quote:

Originally Posted by lsturbointeg

Damn! That looks pretty damn good!

Are you planning on running a big wing?

Thanks bro! No im not

lsturbointeg · 05-22-2017, 11:56 AM

Quote:

Originally Posted by fromwrxto330ci

Thanks fellas!

Thanks bro! No im not

Cool! Just checking. Seems with the wider cars big spoilers are what usually follows

Johnsaidgo · 05-22-2017, 12:16 PM

Just dropped my f10 off at outcast garage. Getting bags installed. Pictures will be up end of the week when I get the car back

lsturbointeg · 05-22-2017, 04:57 PM

Quote:

Originally Posted by Johnsaidgo

Just dropped my f10 off at outcast garage. Getting bags installed. Pictures will be up end of the week when I get the car back

Oh SWEET! Was this the one from the guy selling from the MarketPlace?

lsturbointeg · 05-22-2017, 05:09 PM

Johnsaidgo · 05-22-2017, 08:39 PM

Quote:

Originally Posted by lsturbointeg

Oh SWEET! Was this the one from the guy selling from the MarketPlace?

Yessir haha picked them up last week and shopped around for a shop that could get it done before beemerfest

lsturbointeg · 05-22-2017, 11:06 PM

Quote:

Originally Posted by Johnsaidgo

Yessir haha picked them up last week and shopped around for a shop that could get it done before beemerfest

Nice! Can't wait! Always wanted to bag my ride but never seen a straight forward kit for the 5er?

xxpanipuri · 05-23-2017, 09:18 AM

Quote:

Originally Posted by fromwrxto330ci

Update

baby got back!

looking good!

Russkey · 05-23-2017, 10:48 AM

Replaced the black HRE logo with the original one! I prefer the original. Which one do you like better?

lsturbointeg · 05-23-2017, 03:18 PM

Quote:

Originally Posted by Russkey

Replaced the black HRE logo with the original one! I prefer the original. Which one do you like better?

i'm feelin' the black one!

ALPWhite · 05-23-2017, 03:34 PM

FINALLY got my tire pressure set correctly....

. After coding the TPMS I realized my 10 year old tire gauge was off by 10psi.

ezaircon4jc · 05-23-2017, 04:32 PM

Quote:

Originally Posted by Russkey

Replaced the black HRE logo with the original one! I prefer the original. Which one do you like better?

Quote:

Originally Posted by lsturbointeg

i'm feelin' the black one!

What he ↑ said!!

AMT92 · 05-23-2017, 05:04 PM

Quote:

Originally Posted by Russkey

Replaced the black HRE logo with the original one! I prefer the original. Which one do you like better?

Gonna go with the original. Flows better with the theme of your car

Teddylongtooth · 05-24-2017, 05:21 PM

Black, black, black, red no match nothing!

flamelauncher14 · 05-26-2017, 02:37 PM

Getting my grills, side trim, and wheels all painted gloss black tomorrow (they're currently matte, and the wheels are gunmetal). Also doing the brake calipers.

While everything is off on the car I might take a crack at the coilover install. Anyone have any advice they can give me? I have very basic mechanical knowledge (fluid changes, diagnosing, etc) and can turn a wrench decently. This all will be done in my friend's collision shop too so he has access to tons of tools.

Off topic: they just hired a BMW tech and he has all of the fancy BMW tools and thousand-dollar computers. Looks like no more $130 code reads at the dealer for me

lsturbointeg · 05-26-2017, 03:19 PM

Quote:

Originally Posted by flamelauncher14

Getting my grills, side trim, and wheels all painted gloss black tomorrow (they're currently matte, and the wheels are gunmetal). Also doing the brake calipers.

While everything is off on the car I might take a crack at the coilover install. Anyone have any advice they can give me? I have very basic mechanical knowledge (fluid changes, diagnosing, etc) and can turn a wrench decently. This all will be done in my friend's collision shop too so he has access to tons of tools.

Off topic: they just hired a BMW tech and he has all of the fancy BMW tools and thousand-dollar computers. Looks like no more $130 code reads at the dealer for me

pay the BMW tech to put your coilovers in!

i did mine but because it's been awhile i can't really recall any issues i ran into. i know it was pretty straight forward

edit: i remember needing a star type of key to access the rear top perches to remove the OEM struts/shocks and you'll have to access that from the rear shelf

flamelauncher14 · 05-26-2017, 03:35 PM

Quote:

Originally Posted by lsturbointeg

pay the BMW tech to put your coilovers in!

i did mine but because it's been awhile i can't really recall any issues i ran into. i know it was pretty straight forward

edit: i remember needing a star type of key to access the rear top perches to remove the OEM struts/shocks and you'll have to access that from the rear shelf

So I take it there will be a bit of raising/lowering the car on the lift? Lol

05-20-2017, 04:10 PM	#115
Tasmanian Tasmanian 28 Rep 102 Posts Drives: 528Xi Tasman Green Join Date: Nov 2015 Location: New Jersey iTrader: (0)	Took me 3 hours, but installed rear mudflaps today. The are the official BMW version. had to make a few adjustments and drilling to get the rigth rear one to fit. Tasmanian
	Appreciate 0 Quote

05-22-2017, 12:16 PM	#118
Johnsaidgo Private 5 Rep 81 Posts Drives: 2011 535i Join Date: Mar 2017 Location: Orange County, CA iTrader: (0)	Just dropped my f10 off at outcast garage. Getting bags installed. Pictures will be up end of the week when I get the car back
	Appreciate 0 Quote

05-22-2017, 05:09 PM	#120
lsturbointeg Lieutenant General 9159 Rep 14,522 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)
	Appreciate 0 Quote

05-23-2017, 10:48 AM	#124
Russkey Captain 155 Rep 751 Posts Drives: '12 BMW AW 550xi Join Date: Apr 2011 Location: Miami, FL iTrader: (0) Garage List 2012 550xi [10.00]	Replaced the black HRE logo with the original one! I prefer the original. Which one do you like better? Attached Images __________________ '15 Porsche Macan S / Black & Garnet Red / 20" RS Spyder Wheels / CF trim / Red Calipers / Black Rear Badge. '12 AW 550xi / Dinan S2 / Arkym CF Spoiler / 3D Design Style Splitter / Eisenmann Race Exhaust / 20' HRE FF01 / ACS Springs / CF Grill / CF 3D Design Diffuser / Blue Calipers...
	Appreciate 0 Quote

05-23-2017, 03:34 PM	#126
ALPWhite First Lieutenant 138 Rep 345 Posts Drives: 2013 Alpine White 535iX MSport Join Date: Jul 2007 Location: NJ iTrader: (0)	FINALLY got my tire pressure set correctly.... . After coding the TPMS I realized my 10 year old tire gauge was off by 10psi. Attached Images __________________ Current: 2013 F10 Previous: 2007 E90 Previous: 1994 E34
	Appreciate 0 Quote

05-24-2017, 05:21 PM	#129
Teddylongtooth ZEROdoubleZERO 228 Rep 659 Posts Drives: 2011 550i m sport Join Date: Sep 2015 Location: Las Vegas iTrader: (1)	Black, black, black, red no match nothing!
	Appreciate 0 Quote

05-26-2017, 02:37 PM	#130
flamelauncher14 Second Lieutenant 66 Rep 233 Posts Drives: my neighbors crazy! Join Date: May 2017 Location: San Diego, CA iTrader: (0) Garage List 2009 Nissan GT-R [10.00]	Getting my grills, side trim, and wheels all painted gloss black tomorrow (they're currently matte, and the wheels are gunmetal). Also doing the brake calipers. While everything is off on the car I might take a crack at the coilover install. Anyone have any advice they can give me? I have very basic mechanical knowledge (fluid changes, diagnosing, etc) and can turn a wrench decently. This all will be done in my friend's collision shop too so he has access to tons of tools. Off topic: they just hired a BMW tech and he has all of the fancy BMW tools and thousand-dollar computers. Looks like no more $130 code reads at the dealer for me __________________ Current: 2009 Nissan GT-R \| 2012 Converted \| Cobb Tuned \| AMS Downpipes \| Armytrix Exhaust \| AFE Intakes \| Forgestar F14 + Pirelli P Zero 295/305 -- Past: 2011 550i ///M Sport \| 2010 M6 Coupe \| 2004 BMW M3 Convertible \| 2003 BMW 330i
	Appreciate 0 Quote