[carchrism5]

BIMMERPOST / Classifieds

Asking Price:

Sold

Or Best Offer

Item Interest

Up for sale is a set of MORR 21” forged 3 piece wheels in F10/12/13 fitment. I have owned these wheels for several years now and they have spent most of the time off of the car because between weather and NYC metro roads, the 21” 3 piece was not ideal so I switched to a 20” one piece with an all season tire.

MORR Wheels is no longer in business and while there was some controversy with the business, when they were producing wheels they made excellent forged options that were on par with the likes of HRE and others. Since MORR has gone out of business I have spent a tremendous amount of time gathering specs and suppliers used so that I could be able to source replacement parts if needed. Over the years parts were bent/cracked on the wheels and I was able to get exact replacement parts and I will provide that information to the buyer as well.

The condition of the wheels is excellent except for one lip that had a piece of chrome flake that is a little smaller than a dime. To make the wheel perfect the lip would need to be re-chromed which can be done for under $200.

I recently had a barrel and a lip replaced on a rear wheel and never mounted to the car again after repair. If you look closely in the pictures you will notice both rear tires are facing the same direction because I made the mistake of not noting which side it was from when repaired.

The tires have plenty of tread since they were not used much but please note they are 5+ years old.

TPMS included.

Specs:
Wheels: MORR MultiForged™ Competition MS08.C w/ hidden hardware,
Race- Prep Precision Machining, Side-Spoke Precision Pocketing &
BackPad Precision Pocketing

Size: 21x9" (23lbs) 21x10.5" (27lbs)
Bolt Pattern: 5x120 (I do not have offset unfortunately)
Finish: Silver Powdercoated Center, Chrome step-lips, Silver Inner-Barrels
Tires: Toyo Proxes 255/30/21 & 295/25/21

The wheels look absolutely amazing and are notably lighter than stock wheels. For the right person and car these wheels will really set the car apart. I loved the wheels but they unfortunately I had to step down to a smaller size to be a little more practical. I have tried to represent these wheels as best as possible because I want to be transparent and the buyer to have as much information as possible. These wheels were over $8k new and I have priced them at less than half knowing that the lip needs chroming and while they are fine to be driven on the buyer may be looking to change tires in the near future due to age.

The asking price is $3,995 with everything considered and they are located in Stamford, CT (just outside NYC). I am open to reasonable offers. My email is also my username at gmail if you prefer to email.

[F10DriverNC]

Are these still available?

[carchrism5]

Originally Posted by F10DriverNC

Are these still available?

Yes they are, message sent.

[Dc71]

I've recently purchased Asanti wheels 20x9, 20x10.5 on this past Monday,and I've noticed they eat a lot of gas. With your previous wheels or current, do you have the same issue?

[carchrism5]

Originally Posted by Dc71

I've recently purchased Asanti wheels 20x9, 20x10.5 on this past Monday,and I've noticed they eat a lot of gas. With your previous wheels or current, do you have the same issue?

That was not the case with these as they are notably lighter than the stock setup.

Still available. TTT

[carchrism5]

TTT

[carchrism5]

As there's slight hope of spring coming soon in the northeast just wanted to bring these back up.

Willing to meet up within a reasonable distance and open to offers. I can be reached via PM or my username at gmail for ease.

[carchrism5]

TTT

[carchrism5]

BUMP

[carchrism5]

TTT OBO

[carchrism5]

Price lowered $3,495 OBO

[carchrism5]

First reasonable offer will be accepted, pickup in NY/NJ/CT area