[mlai]

Originally Posted by ICIC

+1 You still need to mod even with 535.

After a week or so driving with the V3, I actually think a bit more stiff would be even better for fast cornering. But now I can't complain anything, it terms of comfort. I actually feel the car ride better with more comfort compare to stock, even going through speed bumpers. Hopefully I'm not bias.

Honeymoon periods

[RC3]

Originally Posted by AsiaKid

I got bored, so I ordered the BMS. Will update you once it arrives...hopefully can get other stuff installed the next 2 weeks. I was thinking H&R for sure, now you guys make me second guess...hahaha...hrmm...i guess if KW..then no quad exhaust.

I think you should get both. KWV3 and QUAD.

Originally Posted by ICIC

+1 You still need to mod even with 535.

After a week or so driving with the V3, I actually think a bit more stiff would be even better for fast cornering. But now I can't complain anything, it terms of comfort. I actually feel the car ride better with more comfort compare to stock, even going through speed bumpers. Hopefully I'm not bias.

I really like a ride on your car.

[528imsport]

Originally Posted by AsiaKid

What is the best parking lot for CWB? I need to get monthly thereand when I just took the car into Windsor house i was so scared of that initial entry that goes up the ramp because it is so tight. I also left Sunning plaza, but that is too expensive ($4700 a month).

Is the one next to Ikea the most open? Any suggestions? H&S?

lol now this is why I never lower my cars, my wife would kill me if I can not park the car in any car park in HK.
the best 1 is time square and you get 2 hours free parking.

[528imsport]

Originally Posted by RC3

Very long wait, 2.5 months. I chased many times too. You may just keep going there and yell at them as mlai suggested. When my kit arrived, WK told me one more set also came along for sale. But gone in no time.

Hugh car compared to 3er, almost like a 7er. I would love to have IAS for driving this big boy in HK. Yeah, mlai has it.

if they are shipping it buy sea it will take 10 to 12 week to arrive, most of the company wait until they have a big shipment then they order to save cost on the lot. I wait 15 weeks for my brakes to arrive in my pre-lci e60.

[528imsport]

Originally Posted by AsiaKid

ok, la, deal..i go install BMS PBX...RC3...you know shortcut for supplier? I would do the research myself, but you are like the google of HK F10 haha

[528imsport]

Originally Posted by ICIC

If you are consider spring, why not trying KW? I think it should be fine. On sale now 3K included installation, I think you can't bid that price, worth to give a try.

kw are very hard in ride, it is more for racing.

[528imsport]

Originally Posted by AsiaKid

Actually, originally, i thought was going to install KW, because i thought cost was just double..but the cost is almost like 5-6x...haha i don't know if i will get value out of it. I think I not fully appreciate. Even with the KW, i still need to take to shop eveyrtime for adjust...not like own adjustment.

I think i keep all mods under 80K..otherwise i will be annoyed that i didnt get 535

it dose not matter what car you get, we will still end up spend 80k on mods
what the fun in life if we don't mod the car lol

[528imsport]

Originally Posted by RC3

Coilovers and springs are like night and day. I think I would get KWV3 if I didn't get the springs. Now I just wait for my stock shocks to fail and.... hehe.

Tones of mods even with 535, may be minus the exhaust since the dual output is already good looking.

you don't have to wait long they will run out in 45000km

[528imsport]

Originally Posted by RC3

Koni has coilovers for F10 now? I think any coilovers you can adjust the height you want from stock to slammed. For you non-typical dude, you can have them higher than stock even. Just like a Range Rover.

why not try the FSD

[528imsport]

Originally Posted by AsiaKid

I got bored, so I ordered the BMS. Will update you once it arrives...hopefully can get other stuff installed the next 2 weeks. I was thinking H&R for sure, now you guys make me second guess...hahaha...hrmm...i guess if KW..then no quad exhaust.

congrats cant wait to see it.

[mlai]

Originally Posted by pinguhk

lol now this is why I never lower my cars, my wife would kill me if I can not park the car in any car park in HK.
the best 1 is time square and you get 2 hours free parking.

I don't think AsiaKid is talking about ground clearance, but more about the narrow two-way ramps there.........

[528imsport]

Originally Posted by mlai

I don't think AsiaKid is talking about ground clearance, but more about the narrow two-way ramps there.........

ic

[AsiaKid]

Pingu, you had lots of free time yesterday nite

MLai, isground clearance a problem with lowered and MSport? does it scrape?

[AsiaKid]

this morning i mean

[mlai]

Originally Posted by AsiaKid

Pingu, you had lots of free time yesterday nite

MLai, isground clearance a problem with lowered and MSport? does it scrape?

Yes. It is a problem. But not big enough not to do it

[koby]

I actually havent had any problems w my m sport lowered w eibachs...

Have had only one problem and thats coming out of my own garage where there is a non standard speed bump where one side is nearly as high as a curb!

[528imsport]

Originally Posted by AsiaKid

this morning i mean

lol I am a designer so hole day is free time for me.

[528imsport]

Originally Posted by AsiaKid

MLai, isground clearance a problem with lowered and MSport? does it scrape?

it will scrape but when you sell the car just repaint it.
just do it
all our e60 are scraped

[RC3]

Originally Posted by pinguhk

you don't have to wait long they will run out in 45000km

That will be long for me, I only have 3,000km now.

Originally Posted by pinguhk

why not try the FSD

Don't think they have FSD for F10 yet.

Originally Posted by AsiaKid

MLai, isground clearance a problem with lowered and MSport? does it scrape?

For H&R, it lowers the front and back by 1.4" and 1.3". Front bumper for M-tech is basically the same as the stock bumper in terms of ground clearance. I have no problem scraping the front. Unless you race through the speed bumps or the beginning/end of ramps. Even scrapped, it's hardly seen since the bottom part of the bumper is the lowest part, you won't see it. I scrapped my stock bumper a few times. Can't tell.

[RC3]

Originally Posted by pinguhk

it will scrape but when you sell the car just repaint it.
just do it
all our e60 are scraped

I think because most of you added front lips.

[528imsport]

Originally Posted by RC3

I think because most of you added front lips.

no
most of them have the M tech kit with no spliter
the Mtech is 2cm longer in high than the stock

[RC3]

Originally Posted by pinguhk

no
most of them have the M tech kit with no spliter
the Mtech is 2cm longer in high than the stock

I see. but 2cm is no that much, less than an inch. Like a finger in width. Shouldn't be a problem.