SHOW OFF YOUR 20"s

spacegray528 · 01-14-2022, 10:55 PM

Quote:

Originally Posted by Blue Angel

^ Sharp!

Thanks, just need to drop it some.

550bye · 01-14-2022, 11:13 PM

Stance SF07 - 20x9 on Toyo Extensa 245/40 in the front and 20x10.5 on Toyo R888R 285/35ZR20 in the rear.

Blue Angel · 01-15-2022, 07:37 AM

Quote:

Originally Posted by IS500

How are neomax holding up and how do like them .

They're decent. Not perfect but decent. I'm willing to bet that they're still a good value vs a KW V3 given they're half the price, but they really could use more compression damping.

One of these days I'll do a full review.

IS500 · 01-15-2022, 10:13 AM

Quote:

Originally Posted by Blue Angel

They're decent. Not perfect but decent. I'm willing to bet that they're still a good value vs a KW V3 given they're half the price, but they really could use more compression damping.

One of these days I'll do a full review.

That’s good to hear, looking forward to the review

Thanks

Makk3 · 01-16-2022, 09:18 AM

Quote:

Originally Posted by 14AWBayArea

Attachment 2730135

What ET do you have on these?

I was offered a good deal for BBS CH for F11 but I don't know if they fit. Wheels are with the following specs:

20x9 ET24 front
20x10,5 ET24 Rear

Does anyone know if they are suitable for the touring?

Blue Angel · 01-16-2022, 10:14 AM

In my opinion, ET24 is going to be very aggressive on the rear unless you're using a narrow tire, like 245 or 255.

remmib · 01-16-2022, 10:44 AM

Quote:

Originally Posted by Makk3

Quote:

Originally Posted by 14AWBayArea

Attachment 2730135

What ET do you have on these?

I was offered a good deal for BBS CH for F11 but I don't know if they fit. Wheels are with the following specs:

20x9 ET24 front
20x10,5 ET24 Rear

Does anyone know if they are suitable for the touring?

I think the CH comes in ET35 too, I'd recommend that.

Taylorguy74 · 03-11-2022, 09:09 AM

Quote:

Originally Posted by jayster0966

My contribution.

What offsets did you go with on these?

jayster0966 · 03-16-2022, 09:24 AM

Quote:

Originally Posted by Taylorguy74

What offsets did you go with on these?

35 offset.

Kf10x · 03-17-2022, 04:15 AM

Quote:

Originally Posted by Blue Angel

Square 275/35-20 Indy 500 on 20 x 9.5 Fast FC04 et30 F and et33 R:

This setup

Kf10x · 03-17-2022, 04:16 AM

Would 20s be daily drivable in SoCal street?

Blue Angel · 03-17-2022, 02:54 PM

20's on 245/35 and 275/30 runflats (the original BMW setup) is pretty harsh on bad roads and tough on wheels. Lots of bent wheel/blown tire possibilities on potholes.

Using regular non-run flat tires is better as the tires can absorb impacts easier. Going with a taller tire is what I did, which is even better again. 275/35 is 1" larger diameter than stock 275/30, so more sidewall to absorb bumps and less chance of bent wheels.

EDIT: BMW not BEM

Kf10x · 03-17-2022, 03:41 PM

Cool thank you, I’m not sure if 20s are for me. I know 19s will be the same price but maybe I’ll get bigger sidewalls

Blue Angel · 03-17-2022, 08:25 PM

Good luck!

Wht550jersey · 03-30-2022, 05:51 PM

Quote:

Originally Posted by 14AWBayArea

Attachment 2730135

Specs ?

myalpine535i · 04-03-2022, 04:00 PM

Quote:

Originally Posted by bake

OEM M5 wheels

wheels and specs? i have the same model etc... and have been eyeing these. thanks

BMWGoogler · 04-08-2022, 03:22 PM

Hi fam, I'm completely new to wheel choice and fitment, but I'm looking to move to 20" wheels on my F10. I'm thinking of the staggered wheels/tires, and whether they'd sit tucked, flush, etc. I'm hoping for flush or close to it, and I don't want any rubbing or having to run goofy camber or anything. Will these pretty much bolt on and be good to go?

2011 535i xdrive- stock drive height, but I'm considering lowering some

TSW Chicane - Gloss black w/Mirror Cut Face on Michelin Pilot Sport AS3+
Front:
20x8.5 5x120 ET:35
245/35r20

Rear:
20x10 5x120 ET: 40
275/30r20 - or - 285/30r20

Blue Angel · 04-09-2022, 07:31 AM

Those sizes will fit fine, you shouldn't have any issues.

The stock spec for the front is 20x8.5 et33, so you're 2mm less in the front but it will still fit well as the front F10 fitment is pretty good from the factory.

The stock staggered rear is 20x9 et44 and is too far inboard, needing a 10mm spacer to look correct. Your et40 setup only moves the tire outboard by 4mm, and aftermarket 275s are a bit wider than the OEM tire so it should look good.

Some 285s are quite a bit wider than 275s, but should still be ok. Some have tried 285s on the 343m M5 rear wheels which are 20x10 et34 and they rub, forcing them to change to 275s. You have 6mm (1/4") less offset so either tire should be ok.

BMWGoogler · 04-11-2022, 12:37 PM

Quote:

Originally Posted by Blue Angel

Those sizes will fit fine, you shouldn't have any issues.

The stock spec for the front is 20x8.5 et33, so you're 2mm less in the front but it will still fit well as the front F10 fitment is pretty good from the factory.

The stock staggered rear is 20x9 et44 and is too far inboard, needing a 10mm spacer to look correct. Your et40 setup only moves the tire outboard by 4mm, and aftermarket 275s are a bit wider than the OEM tire so it should look good.

Some 285s are quite a bit wider than 275s, but should still be ok. Some have tried 285s on the 343m M5 rear wheels which are 20x10 et34 and they rub, forcing them to change to 275s. You have 6mm (1/4") less offset so either tire should be ok.

Thanks, I appreciate it. The shop has 275s as well as 285s. I could switch to the 275s.

aumazdelete · 04-14-2022, 03:29 AM

That thank lip A+

aumazdelete · 04-14-2022, 03:30 AM

Quote:

Originally Posted by 550bye

Stance SF07 - 20x9 on Toyo Extensa 245/40 in the front and 20x10.5 on Toyo R888R 285/35ZR20 in the rear.

Trunk lip dope

550bye · 04-16-2022, 04:10 PM

Quote:

Originally Posted by automaz_

Quote:

Originally Posted by 550bye

Stance SF07 - 20x9 on Toyo Extensa 245/40 in the front and 20x10.5 on Toyo R888R 285/35ZR20 in the rear.

Trunk lip dope

Thanks.

01-14-2022, 11:13 PM	#90
550bye Second Lieutenant 1390 Rep 262 Posts Drives: 2011 550i Join Date: Dec 2018 Location: Utah iTrader: (0) Garage List 2011 BMW 550i [5.67]	Stance SF07 - 20x9 on Toyo Extensa 245/40 in the front and 20x10.5 on Toyo R888R 285/35ZR20 in the rear. Attached Images __________________ 2011 550i (N63) Upgraded 51mm turbos, Heatsync Stage 3 Flash, JB4 stacked, BMS WMI, Arm Charge Pipes, Heatsync Catless DPs, X-Pipe, Res Muffler Delete, xHP Stage 3 Trans Flash, Turbosmart Diverter Valves, 3.5 TMAPs, Oil Cooler, Heatsync Front Mounted Max Cool Intakes, Walbro LPFP and e40 mix rollin on Stance SF07 9x20 w/Toyo Extensa and 10.5x20 w/Toyo R888R.
	Appreciate 3 myalpine535i0.00 MICHAELKNIGHT0.00 Hornet-01121.50 Quote

01-16-2022, 10:14 AM	#94
Blue Angel Major 998 Rep 1,037 Posts Drives: 2011 323i and 2016 535d Join Date: Mar 2011 Location: Ottawa, ON iTrader: (0)	In my opinion, ET24 is going to be very aggressive on the rear unless you're using a narrow tire, like 245 or 255.
	Appreciate 0 Quote

03-17-2022, 04:16 AM	#99
Kf10x New Member 3 Rep 22 Posts Drives: BMW 535i Join Date: Mar 2022 Location: SoCal iTrader: (0)	Would 20s be daily drivable in SoCal street?
	Appreciate 0 Quote

03-17-2022, 02:54 PM	#100
Blue Angel Major 998 Rep 1,037 Posts Drives: 2011 323i and 2016 535d Join Date: Mar 2011 Location: Ottawa, ON iTrader: (0)	20's on 245/35 and 275/30 runflats (the original BMW setup) is pretty harsh on bad roads and tough on wheels. Lots of bent wheel/blown tire possibilities on potholes. Using regular non-run flat tires is better as the tires can absorb impacts easier. Going with a taller tire is what I did, which is even better again. 275/35 is 1" larger diameter than stock 275/30, so more sidewall to absorb bumps and less chance of bent wheels. EDIT: BMW not BEM Last edited by Blue Angel; 03-17-2022 at 08:24 PM.. Reason: Spelling
	Appreciate 1 Kf10x3.00 Quote

03-17-2022, 03:41 PM	#101
Kf10x New Member 3 Rep 22 Posts Drives: BMW 535i Join Date: Mar 2022 Location: SoCal iTrader: (0)	Cool thank you, I’m not sure if 20s are for me. I know 19s will be the same price but maybe I’ll get bigger sidewalls
	Appreciate 0 Quote

03-17-2022, 08:25 PM	#102
Blue Angel Major 998 Rep 1,037 Posts Drives: 2011 323i and 2016 535d Join Date: Mar 2011 Location: Ottawa, ON iTrader: (0)	Good luck!
	Appreciate 1 Kf10x3.00 Quote

04-08-2022, 03:22 PM	#105
BMWGoogler Registered 0 Rep 2 Posts Drives: 2011 BMW 535ix Join Date: Oct 2013 Location: United States iTrader: (0)	Advice on fitment Hi fam, I'm completely new to wheel choice and fitment, but I'm looking to move to 20" wheels on my F10. I'm thinking of the staggered wheels/tires, and whether they'd sit tucked, flush, etc. I'm hoping for flush or close to it, and I don't want any rubbing or having to run goofy camber or anything. Will these pretty much bolt on and be good to go? 2011 535i xdrive- stock drive height, but I'm considering lowering some TSW Chicane - Gloss black w/Mirror Cut Face on Michelin Pilot Sport AS3+ Front: 20x8.5 5x120 ET:35 245/35r20 Rear: 20x10 5x120 ET: 40 275/30r20 - or - 285/30r20
	Appreciate 0 Quote

04-09-2022, 07:31 AM	#106
Blue Angel Major 998 Rep 1,037 Posts Drives: 2011 323i and 2016 535d Join Date: Mar 2011 Location: Ottawa, ON iTrader: (0)	Those sizes will fit fine, you shouldn't have any issues. The stock spec for the front is 20x8.5 et33, so you're 2mm less in the front but it will still fit well as the front F10 fitment is pretty good from the factory. The stock staggered rear is 20x9 et44 and is too far inboard, needing a 10mm spacer to look correct. Your et40 setup only moves the tire outboard by 4mm, and aftermarket 275s are a bit wider than the OEM tire so it should look good. Some 285s are quite a bit wider than 275s, but should still be ok. Some have tried 285s on the 343m M5 rear wheels which are 20x10 et34 and they rub, forcing them to change to 275s. You have 6mm (1/4") less offset so either tire should be ok.
	Appreciate 0 Quote

04-14-2022, 03:29 AM	#108
aumazdelete Enlisted Member 5 Rep 36 Posts Drives: 2012 BMW 535 xi Join Date: Apr 2022 Location: Chicago iTrader: (0)	That thank lip A+
	Appreciate 0 Quote