MHD Tuning Post Your Logs

harris69 · 09-07-2018, 05:48 AM

This morning's log after running a bottle of Chevron Techron treatment.

https://datazap.me/u/harris69/sep7?l...30-31-32-33-34

ey2001 · 09-08-2018, 11:49 AM

Here is my log after my FMIC outside temp was 85F

https://datazap.me/u/ey2001/after-fmic?log=0&data=4-22

harris69 · 09-08-2018, 10:10 PM

So, around 100 °F IAT? Clean run btw.

ey2001 · 09-08-2018, 10:24 PM

Quote:

Originally Posted by harris69

So, around 100 °F IAT? Clean run btw.

Yea... stock intercooler was much higher iat

harris69 · 09-09-2018, 06:42 AM

Are you still mixing E85 in your fuel?

ey2001 · 09-09-2018, 09:35 AM

Quote:

Originally Posted by harris69

Are you still mixing E85 in your fuel?

Yes

harris69 · 09-09-2018, 03:42 PM

Quote:

Originally Posted by ey2001

Yes

How much E-85 per fill up? Have you logged your car without E-85, and what happened when you didn't mix it?

ey2001 · 09-09-2018, 05:19 PM

Quote:

Originally Posted by harris69

Quote:

Originally Posted by ey2001

Yes

How much E-85 per fill up? Have you logged your car without E-85, and what happened when you didn't mix it?

About 3 gallons to the tank... my timing looks a lot better with it... also it's pretty hot here in socal right now so it helps.

ey2001 · 09-14-2018, 01:32 PM

Harris69 do you have timing pulls low rpm?

harris69 · 09-14-2018, 03:48 PM

Quote:

Originally Posted by ey2001

Harris69 do you have timing pulls low rpm?

Only when I first step on the throttle but I normally don't log. Why, what is your's doing?

ey2001 · 09-14-2018, 04:42 PM

Quote:

Originally Posted by harris69

Quote:

Originally Posted by ey2001

Harris69 do you have timing pulls low rpm?

Only when I first step on the throttle but I normally don't log. Why, what yours doing?

Straight 91 I do see timing correction. Tried stock map... I guess it does the same on stock map too... so I guess it's normal... haven't driven on stock that much... just testing it out... planning to get a custom tune soon

harris69 · 09-14-2018, 05:33 PM

Who are you going with for custom tuning?

harris69 · 09-15-2018, 06:09 AM

MHD told me that small timing corrections are normal. Also, if you haven't done it already subscribe/like/follow them on Facebook. I also use the Messenger to send them my logs and they review my logs and give me their feedback based on what they see.
One of my other complaints (and after looking at my logs they have told me they'll be addressing that) was the car doesn't reach it's target boost at any rpm.

5soko · 09-17-2018, 10:11 AM

Quote:

Originally Posted by ey2001

Here is my log after my FMIC outside temp was 85F

https://datazap.me/u/ey2001/after-fmic?log=0&data=4-22

Man that FMIC has really cooled things down in the IAT department..

What fmic you running?

ey2001 · 09-17-2018, 10:35 AM

Quote:

Originally Posted by 5soko

Quote:

Originally Posted by ey2001

Here is my log after my FMIC outside temp was 85F

https://datazap.me/u/ey2001/after-fmic?log=0&data=4-22

Man that FMIC has really cooled things down in the IAT department..

What fmic you running?

Yea it did... Wagner

harris69 · 09-17-2018, 04:25 PM

I will be receiving the first batch of VRSF intercoolers (I am on the list, and hopefully will make it) along with the VRSF chargepipe pretty soon. I can't wait to get my hands on them.

ey2001 · 09-18-2018, 11:15 AM

Quote:

Originally Posted by harris69

I will be receiving the first batch of VRSF intercoolers (I am on the list, and hopefully will make it) along with the VRSF chargepipe pretty soon. I can't wait to get my hands on them.

Nice!! Finally..... I couldn't wait... are you on the latest tune? If so did it help with your timing?

harris69 · 09-18-2018, 12:19 PM

I am on version 0.995 or whatever version is out now. MHD will be updating their maps for the PWG F10s early next month, and EWGs sometime after that.

ey2001 · 09-18-2018, 12:26 PM

Quote:

Originally Posted by harris69

I am on version 0.995 or whatever version is out now. MHD will be updating their maps for the PWG F10s early next month, and EWGs sometime after that.

Version 1.0 is out

harris69 · 09-18-2018, 12:30 PM

When did that happen. It's probably for other cars as we share same platform with other models, or am I missing something?

harris69 · 09-18-2018, 12:34 PM

After reading your post I updated my app and sure enough version 1.0 is out. Did you notice any difference in power?

ey2001 · 09-18-2018, 12:36 PM

Quote:

Originally Posted by harris69

After receiving your message I updated my app and sure enough version 1.0 is out. Did you notice any difference in power?

I didn't update yet didn't have time in the morning... was running late... going to go down to the car and update after I get out of my meeting

09-07-2018, 05:48 AM	#111
harris69 Lieutenant 64 Rep 431 Posts Drives: 1997 M3/4, 1984 533i,1997 328i Join Date: Jul 2010 Location: Asheville, NC iTrader: (0)	This morning's log after running a bottle of Chevron Techron treatment. https://datazap.me/u/harris69/sep7?l...30-31-32-33-34
	Appreciate 0 Quote

09-08-2018, 11:49 AM	#112
ey2001 Captain 310 Rep 716 Posts Drives: F10 535i 6spd Join Date: Apr 2007 Location: la iTrader: (0)	Here is my log after my FMIC outside temp was 85F https://datazap.me/u/ey2001/after-fmic?log=0&data=4-22
	Appreciate 0 Quote

09-08-2018, 10:10 PM	#113
harris69 Lieutenant 64 Rep 431 Posts Drives: 1997 M3/4, 1984 533i,1997 328i Join Date: Jul 2010 Location: Asheville, NC iTrader: (0)	So, around 100 °F IAT? Clean run btw.
	Appreciate 0 Quote

09-09-2018, 06:42 AM	#115
harris69 Lieutenant 64 Rep 431 Posts Drives: 1997 M3/4, 1984 533i,1997 328i Join Date: Jul 2010 Location: Asheville, NC iTrader: (0)	Are you still mixing E85 in your fuel?
	Appreciate 0 Quote

09-14-2018, 01:32 PM	#119
ey2001 Captain 310 Rep 716 Posts Drives: F10 535i 6spd Join Date: Apr 2007 Location: la iTrader: (0)	Harris69 do you have timing pulls low rpm?
	Appreciate 0 Quote

09-14-2018, 05:33 PM	#122
harris69 Lieutenant 64 Rep 431 Posts Drives: 1997 M3/4, 1984 533i,1997 328i Join Date: Jul 2010 Location: Asheville, NC iTrader: (0)	Who are you going with for custom tuning?
	Appreciate 0 Quote

09-15-2018, 06:09 AM	#123
harris69 Lieutenant 64 Rep 431 Posts Drives: 1997 M3/4, 1984 533i,1997 328i Join Date: Jul 2010 Location: Asheville, NC iTrader: (0)	MHD told me that small timing corrections are normal. Also, if you haven't done it already subscribe/like/follow them on Facebook. I also use the Messenger to send them my logs and they review my logs and give me their feedback based on what they see. One of my other complaints (and after looking at my logs they have told me they'll be addressing that) was the car doesn't reach it's target boost at any rpm.
	Appreciate 0 Quote

09-17-2018, 04:25 PM	#126
harris69 Lieutenant 64 Rep 431 Posts Drives: 1997 M3/4, 1984 533i,1997 328i Join Date: Jul 2010 Location: Asheville, NC iTrader: (0)	I will be receiving the first batch of VRSF intercoolers (I am on the list, and hopefully will make it) along with the VRSF chargepipe pretty soon. I can't wait to get my hands on them.
	Appreciate 0 Quote

09-18-2018, 12:19 PM	#128
harris69 Lieutenant 64 Rep 431 Posts Drives: 1997 M3/4, 1984 533i,1997 328i Join Date: Jul 2010 Location: Asheville, NC iTrader: (0)	I am on version 0.995 or whatever version is out now. MHD will be updating their maps for the PWG F10s early next month, and EWGs sometime after that.
	Appreciate 0 Quote

09-18-2018, 12:30 PM	#130
harris69 Lieutenant 64 Rep 431 Posts Drives: 1997 M3/4, 1984 533i,1997 328i Join Date: Jul 2010 Location: Asheville, NC iTrader: (0)	When did that happen. It's probably for other cars as we share same platform with other models, or am I missing something?
	Appreciate 0 Quote

09-18-2018, 12:34 PM	#131
harris69 Lieutenant 64 Rep 431 Posts Drives: 1997 M3/4, 1984 533i,1997 328i Join Date: Jul 2010 Location: Asheville, NC iTrader: (0)	After reading your post I updated my app and sure enough version 1.0 is out. Did you notice any difference in power?
	Appreciate 0 Quote