|
|
|
2010 2011 BMW 5 Series Forum F10 My 520iA Road to 528iA '91 |
|
Post Reply |
|
Thread Tools | Search this Thread |
06-16-2024, 10:49 AM | #45 |
BMW enthusiast since 2004
452
Rep 239
Posts |
Took the oil pan out and found problems... Guess it's time for a new engine.
|
Appreciate
1
IcewaterPete2813.50 |
06-20-2024, 04:44 PM | #46 |
BMW enthusiast since 2004
452
Rep 239
Posts |
Got armrests back and they look very nice. Im looking for e39 528ia to take engine and transmission for this. |
Appreciate
1
IcewaterPete2813.50 |
06-28-2024, 01:34 PM | #48 |
BMW enthusiast since 2004
452
Rep 239
Posts |
Bought 5hp18 from e39 and made a deal of m52b28.
|
Appreciate
2
s_ribs94.50 IcewaterPete2813.50 |
06-29-2024, 03:50 AM | #50 |
BMW enthusiast since 2004
452
Rep 239
Posts |
I was planning to do swap anyways but not this summer... Did not wanna spend the money yet on engine, but as engine was found localy and cheap I had to buy it.
|
Appreciate
0
|
07-08-2024, 01:26 PM | #51 |
BMW enthusiast since 2004
452
Rep 239
Posts |
I found same color trunk lid that looks really nice condition and seller says it's rust free. Very good find for 120bucks.
I will get the engine this weekend. |
Appreciate
0
|
07-26-2024, 05:51 PM | #54 |
BMW enthusiast since 2004
452
Rep 239
Posts |
Not much have happened. Engine is somewhat stripped down and somewhat clean. Tried to change valve stem seals with compressed air but pretty much all cylinders had one or two valves leaking because of carbon build up. So it was nada. Now engine is at my home garage on engine stand. Gotta try the rope trick for valve stems. And order all the parts to get it ready for the swap.
I'm having hard time finding E38 728i m52 oil dip stick tube which should perfect for this. New one costs a bit too much for my taste. Back on the road summer 2199? Been fixing E65 lately. First starter broke down and now electric fan. Without it ac did not work. So money that was itended for this when't in to "dailies" Last edited by zener; 07-26-2024 at 06:14 PM.. |
Appreciate
0
|
09-22-2024, 08:48 AM | #59 |
BMW enthusiast since 2004
452
Rep 239
Posts |
Valve stem seals replaced on the B28. Next step is to do the rod bearings. Then put new timing guides in and timing cover with new gaskets back on. Then it is pretty much ready to start swapping the engine as many parts are needed from the old engine so cant really do more for B28. I will also use cam trays and new lifters from M50. So... let's turn it around. Last edited by zener; 09-22-2024 at 11:34 AM.. |
Appreciate
0
|
09-23-2024, 02:12 PM | #60 |
BMW enthusiast since 2004
452
Rep 239
Posts |
Opened two rods and looks ok to me for and old engine. Crank also looked good.
Gotta get plastigauge and install new bearings if clearences are ok. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|