|
|
01-18-2024, 07:26 AM | #1 |
Registered
0
Rep 2
Posts |
Probably asked before!!
Guys, 1st time here, advise please if possible? Just got a F10 520d with Factory 17" Alloys in rubbish condition so been offered F30 18" as upgrades.
Will they fit as i'm told they're a straight swap? Thanks in advance. |
01-19-2024, 11:22 AM | #2 |
Second Lieutenant
56
Rep 227
Posts |
The alloys are similar in size and offset:
F10 17" are a square set up 17 x 8J ET 30 with 225/55 R17 tyres with a 5 x 120 bolt pattern. F30 18" - if they are a square set up, some sets are staggered - are 18 x 8J ET 34 with 225/45 R18 tyres and the same bolt pattern. If you were to use the F30 wheels, you'd need to change the tyre size to 225/50 R18 to get the same rolling radius. I don't think the different offset makes a meaningful difference. I think that's correct but it's down to you to check and verify at your own risk before you splosh the dosh. Willtheyfit.com is your friend. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|