|
|
|
2010 2011 BMW 5 Series Forum F10 BMW 374mm x 36mm Euro “High Speed” Front Brake Upgrade for F10 |
|
Post Reply |
|
Thread Tools | Search this Thread |
07-14-2019, 01:07 PM | #1 |
First Lieutenant
78
Rep 342
Posts |
BMW 374mm x 36mm Euro “High Speed” Front Brake Upgrade for F10
BMW 374mm x 36mm Euro “High Speed” Front Brake Upgrade for F10 535i or 550i From a 2010 F02 760li VIN WBAKB0C56ACY40145 I bought these intending to put them on my 550i but then stumbled on a screaming deal for a set of 380mm stoptech brakes and got that instead. I just put two hours into cleaning the crud off the outside of these with my buddies media blast cabinet so they are mostly ready to paint. I believe this is bolt in upgrade from the US version 348mm x 30mm rotors used for 535i or 348 x 36mm rotors for 550i F10. I think you will need at least 19" wheels for these. Do your research. This thread has good info on this upgrade. Post #117 lists the parts (also shown below). https://f10.5post.com/forums/showthr...1488894&page=6 Now $325 shipped for calipers & BMW OEM brake pads (~50lbs shipping from 92127) or picked up in North San Diego county area. Price Includes: Caliper housing left + carrier 34116786827 Caliper housing right + carrier 34116786828 Front Brake Pads, BMW OEM 34116794464 https://www.ecstuning.com/b-genuine-...t/34116794464/ Calipers have been cleaned up and media blasted. 98% ready for paint (or not; your choice). Plus another ~$280 in parts can put together a bolt in big brake upgrade for your F10 535 or 550 for roughly $750 all in. You will need to buy rotors: Front Left rotor 34116789543 1 ea Zimmerman 1 piece $98.22 https://www.eeuroparts.com/Parts/445...tor-150291420/ ATE lightweight 2 piece $172.33 https://www.eeuroparts.com/Parts/445...-Rotor-436121/ Front Right Rotor 34116789544 1 ea Zimmerman 1 piece $98.64 https://www.eeuroparts.com/Parts/445...tor-150291520/ ATE lightweight 2 piece $168.33 https://www.eeuroparts.com/Parts/445...-Rotor-436120/ Suggested to replace: Caliper piston seals 2 @ $10.47ea 34111163647 - ATE 250038 https://www.eeuroparts.com/Parts/444...ir-Kit-250038/ BMW Front bleed screw 2 @ $3.18 ea 34116768018 - ATE 390354 https://www.eeuroparts.com/Parts/445...-Screw-390354/ Disc Brake Anti-Rattle Clip Front 2 @ $21.44ea 34116784185 https://www.fcpeuro.com/products/bmw...li-34116784185 Brake pad box label Last edited by Luky; 01-19-2020 at 03:11 PM.. |
07-29-2019, 12:53 AM | #4 |
First Lieutenant
78
Rep 342
Posts |
|
Appreciate
0
|
07-29-2019, 02:07 PM | #5 |
Captain
388
Rep 950
Posts |
free bump,
I can confirm that these are definitely straight up bolt on for all F10s. Who ever buys these can get either the brembo or pagid 2-piece discs (Rock Auto has great price on these) or the Zimmerman single piece discs to match these up with. |
Appreciate
0
|
07-29-2019, 04:04 PM | #6 | |
Lieutenant
59
Rep 590
Posts |
Quote:
|
|
Appreciate
0
|
08-01-2019, 12:15 AM | #7 | |
First Lieutenant
78
Rep 342
Posts |
Quote:
[IMG][/IMG] |
|
Appreciate
0
|
08-01-2019, 01:59 AM | #8 |
Lieutenant
59
Rep 590
Posts |
Quote:
|
Appreciate
0
|
08-02-2019, 10:37 PM | #9 |
First Lieutenant
78
Rep 342
Posts |
Sure: https://www.buybrakes.com
Looks like they still have some sets for F10 starting about $1800. I will say the stoptech pads are dirty as hell, maybe worse than bmw stock pads, but that should allow the rotors to last a long time. (I will be getting black wheels once my RFT wear out to help hide the dust.) Last edited by Luky; 08-03-2019 at 01:47 PM.. |
Appreciate
0
|
08-19-2019, 08:49 AM | #11 | |
First Lieutenant
75
Rep 392
Posts |
Quote:
Are these the same 750 374mm brakes one can retrofit into f10?
__________________
535D Xdrive DUDMD Stage 1
x5d e70 DUDMD stage 2 tune |
|
Appreciate
0
|
08-20-2019, 11:17 PM | #12 |
First Lieutenant
78
Rep 342
Posts |
|
Appreciate
0
|
08-21-2019, 07:58 AM | #13 |
Colonel
1300
Rep 2,590
Posts |
750 uses the same calipers (according to its part numbers) as a 550, last time I checked
|
Appreciate
0
|
08-21-2019, 03:33 PM | #14 |
First Lieutenant
78
Rep 342
Posts |
Yes caliper is the same, but different caliper carriers (bolts to car) to allow usage of larger 374x36 rotors and larger pads. These include both calipers (if you have a 535) and carriers (if you have a 550 and will use your stock calipers). Just buying new carriers for a 550i are ~$300 each which is why I had bought these to clean up and paint. And the larger BMW pads are not cheap... my selling price is the same. If you only want the carriers I can probably fit both in one box with the pads and save you $20 in shipping costs.
|
Appreciate
0
|
08-23-2019, 09:09 AM | #15 | |
Colonel
1300
Rep 2,590
Posts |
Quote:
|
|
Appreciate
0
|
08-23-2019, 01:42 PM | #16 |
First Lieutenant
78
Rep 342
Posts |
For 535 you need both larger carrier and the larger calipers. (And larger rotors/pads). 550 only requires the carrier I believe (caliper is same part number). (And rotors/pads)
Lots of info on the swap in the brake thread I posted above. |
Appreciate
0
|
08-23-2019, 04:09 PM | #17 | |
First Lieutenant
75
Rep 392
Posts |
Quote:
They have large caliper and carriers. so where did you get the "high speed" "euro" part?
__________________
535D Xdrive DUDMD Stage 1
x5d e70 DUDMD stage 2 tune |
|
Appreciate
0
|
08-23-2019, 04:44 PM | #18 |
First Lieutenant
78
Rep 342
Posts |
Yes, that is the same CALIPER on those models. It is the caliper CARRIER that bolts to the car and the LARGER 374X36 rotors that are not available in the USA on F10, but is on European models, hence EURO HIGH SPEED BRAKES which is what BMW calls it. Suggest you read the brake thread from my first post. All of it. Then look up ALL of the part numbers and you should understand.
Do a search for the CARRIER PN 34116786829 and then click on the link for 5' F10 LCI and you will see it is only on EUR models. Last edited by Luky; 08-23-2019 at 05:06 PM.. |
Appreciate
0
|
08-26-2019, 01:53 AM | #19 |
Captain
388
Rep 950
Posts |
Yeah, you definitely need to read up on the other brake thread and look up the "High Speed Brake System" offered on FXX models in Europe. In US, only the 760 and Alpinas came with 374x36 rotors and bigger calipers that he has for sale here.. The brake pads are huge too and you can really tell the difference in braking performance with these on.
|
Appreciate
0
|
08-26-2019, 09:36 AM | #20 | |
First Lieutenant
75
Rep 392
Posts |
Quote:
You have a point in that your part number appears in europan f10 models only. If I look up a 750 caliper in the usa the part number is different. But the drawing shows the same part. and the price is the same $211.51 The user in this thread confirmed 750 brakes are 374 x36 the same size as what you are listing. https://bmw.s.p.o.o.l.s.t.r.e.e.t.co...-upgrade.4949/ Edit: Actually part number 34116786829 is the same for 750 usa and f10 550 euro
__________________
535D Xdrive DUDMD Stage 1
x5d e70 DUDMD stage 2 tune Last edited by rkstar9; 08-26-2019 at 09:45 AM.. |
|
Appreciate
0
|
08-26-2019, 12:57 PM | #21 |
Captain
388
Rep 950
Posts |
Please lets use the other thread for continuing this discussion so as not to ruin the OPs thread further..
I updated this thread with details : https://f10.5post.com/forums/showthr...1488894&page=8 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|