[getBMWparts]

With new engine specifications, the BMW M Performance power kit for the BMW 535i increases power and torque (320 hp/332 lb-ft with automatic transmission ) and speeds up acceleration in a normal test cycle without increasing fuel consumption. The Sport display in the iDrive monitor is updated to reflect the increased horsepower and torque. The development meets the high standards typical for the BMW Group. This applies in particular to the quality and safety of the power kit, which were tested by BMW over an extended test cycle. Kit includes: Performance-optimized engine specifications, M Performance plaque for the engine compartment, and M Performance stickers for the side sills.

• Automatic transmission: increase in performance from 300 hp/300 lb-ft to 320 hp/332 lb-ft
• Improved acceleration from 0-62 mph: -0.3 seconds compared to the standard
• Improved elasticity from 50-70 mph: -0.3 seconds compared to the standard
• Enhanced accelerator calibration
• Extremely sporty engine and exhaust system sound
• Adaptation of the Sport display in the iDrive monitor
• Retention of the BMW Original Warranty
• Fuel consumption and CO2 emissions remain unchanged

*Fits F10 LCI 535i/iX Models produced from 07/2014 with a Plant Integration Level (PIL) of F010-07-14-5xx or higher only. The PIL must be checked at your local BMW dealership to confirm. They can do this by performing a Key Read and selecting Vehicle Key Data, then Software Integration.

**Must include VIN# with order.

***Price includes Free Ground Shipping! (US only)


Shop BMW F10 5 Series M Performance HERE!

[getBMWparts]

[getBMWparts]

[getBMWparts]

[getBMWparts]

[getBMWparts]

[getBMWparts]

[getBMWparts]

[Evan@Tischer]

[getBMWparts]

[getBMWparts]

[getBMWparts]

[getBMWparts]

[getBMWparts]

[getBMWparts]

[getBMWparts]

[Evan@Tischer]

[Evan@Tischer]

Don't miss FREE standard shipping (US, lower 48) on most orders $299+ for a limited time!

[Evan@Tischer]

[Evan@Tischer]

[Evan@Tischer]

[Evan@Tischer]