[khile]

Hi All,

I have retrofitted NBT evo into my f10 and all working great for the most part however i have one issue I'm trying to figure out

When ever i open a door it shows the wrong door open on the cluster for example if open drivers door (RHD) it shows passenger door open and same again if i open passenger door it shows drivers door open.

my car: 2015 f10
nbt evo unit from g30
speedo/cluster: 6WB

came out of a RHD 530e (2019). HVAC panel controls are backwards too so pressing passenger heated seats turns drivers heated seat on

donor vin for NBT EVO: WBAJA92070BN74258
my vin: WBA5D52060G356963

Any help or guidance would be greatly appreciated

[ezaircon4jc]

Sounds like the unit thinks it's in a LHD vehicle.

[khile]

Its weird if i put nbt (id4?) its fine and hvac and 6wb works as expected put evo in and everything is switched I've spent hours trying settings and typekey but all with same result

[khile]

i coded HU_NBT" and Kombi as LHD by editing typecode from 5D52 to 5D51 and that seems to have fixed the issue everything is back to normal now this is defiantly a weird issue.

While its not the correct solution its a working one.

on a side not NBT is programmed to my vin so that should not have been issue

[ezaircon4jc]

Glad you figured it out!

Though your solution was rather odd...