|
|
|
2010 2011 BMW 5 Series Forum F10 Help needed with ZGW module on F10 |
|
Post Reply |
|
Thread Tools | Search this Thread |
10-12-2017, 12:08 PM | #1 |
Private
36
Rep 88
Posts |
Help needed with ZGW module on F10
Long story short....
Flooded car, someone monkey with it an make it run by swapping totally different parts till the car started: modules that they throw at it till they got the car running are: 1. ZGW-High (metal box) - car came with ZWG2-4SK 2. JBBF and the entire fuse panel 3. SZL 4. FRM All back to original modules, new from the dealer, minus the FRM module When I`m plugging in the ZGW-02 8SK that I receive from the dealer (FA & vin coded & flex-ray initiate) the car looses EPS, TBX, and left & right headlights modules. If I`ll plug back the "monkey ZGW-High" EPS comes to life. I did try to flash the ZWG but after SVT_soll and Tal calculation, the ZGW is not in the list. Only 7 or 8 modules are available for flashing (using e-sys 2.81 & 3.30 & 3.31 with the latest psdz data) Car is F10 build 08/2015, I-step factory F010-15-07-504. |
01-10-2019, 04:15 PM | #3 |
Private
36
Rep 88
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
esys, flashing, module, zgw |
|
|