|
|
|
2010 2011 BMW 5 Series Forum F10 Will a 2012 F10 520d....with 4 series 442M alloys fit?? |
|
Post Reply |
|
Thread Tools | Search this Thread |
02-26-2020, 09:02 PM | #1 |
Registered
0
Rep 2
Posts |
Will a 2012 F10 520d....with 4 series 442M alloys fit??
Hi All,
Just looking to see if the 4 series 442M alloys would fit a 2012 5 series F10 520d. Stock Suspension. Its the offset im not sure of? Specs for the 442M = 8JX19 ET:36 OEM part no: 3611784678 8,5JX19 ET:47 OEM part no: 36117846781 Any help would be greatly appreciated! Last edited by mbrozzz; 02-26-2020 at 09:18 PM.. |
02-28-2020, 02:53 PM | #2 |
General
1566
Rep 29,202
Posts |
I wouldn't recommend those as the wheels are narrower and the offset higher. They would sit pretty ticked in.
__________________
F10 520d M-Sport Alpine White | HRE P43SC 20x9+20x11 | Michelin PSS 255/35+295/30 | KW V3 Coilover | M5 Front Sway Bar + M550d Rear Sway Bar | 3DDesign Front Lip | BMW M Performance CF Spoiler | BMW M Performance Diffuser | BMW M Performance Black Grills | BMW M Performance Pedals | |
Appreciate
0
|
02-28-2020, 05:08 PM | #3 |
Registered
0
Rep 2
Posts |
Great thanks, i thought the same and decided against buying..
Are there any other alloys that have a similar look, but would fit better for the f10? I'll probably go for 19" diamond cut black alloys. Its a black 5 series so think this look would look well. Not looking to do much to it, will prob just tint, and change the wheels. A blank canvas |
Appreciate
0
|
02-29-2020, 04:46 AM | #4 | |
General
1566
Rep 29,202
Posts |
Quote:
__________________
F10 520d M-Sport Alpine White | HRE P43SC 20x9+20x11 | Michelin PSS 255/35+295/30 | KW V3 Coilover | M5 Front Sway Bar + M550d Rear Sway Bar | 3DDesign Front Lip | BMW M Performance CF Spoiler | BMW M Performance Diffuser | BMW M Performance Black Grills | BMW M Performance Pedals | |
|
Appreciate
0
|
09-09-2021, 04:06 PM | #5 |
Registered
0
Rep 2
Posts |
Digging up an old thread here but looking for more info on these wheels fitting an F11.
I've got the chance to get a set of these 19s 442M as a replacement to the original 17s, (same as in photo above), and my thoughts are that they will fit fine as long as 6mm spacers are fitted to the fronts and 10mm spacers on the rears. Front - 8JX19 ET:36 Rear - 8.5JX19 ET:47 Can anyone more knowledgeable confirm this please? Also, would there be an issue with centre bore sizing swapping the originals over to 442M? Cheers Last edited by calum88; 09-10-2021 at 02:28 AM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|