[MiroslavVrtal Bmwf11]

Originally Posted by shawnsheridan

Your Receive PM function is disabled. PM me when working.

Now is it ok ? Thx

[MiroslavVrtal Bmwf11]

Originally Posted by MiroslavVrtal Bmwf11

Now is it ok ? Thx

I look at this:
Thank you for verifying your account!
In order to use the PM system and be a full fledged member of this community, you will have to make a certain number of verified post replies and wait 7 days for your account to be upgraded.

I will be wait 7 days at least :/

[shawnsheridan]

Originally Posted by MiroslavVrtal Bmwf11

Now is it ok ? Thx

Originally Posted by MiroslavVrtal Bmwf11

I look at this:
Thank you for verifying your account!
In order to use the PM system and be a full fledged member of this community, you will have to make a certain number of verified post replies and wait 7 days for your account to be upgraded.

I will be wait 7 days at least :/

Ok, 7 Day wait is a new thing.

[moutazsassi]

hello guys im new to this website i would like to know if i can code /program my bmw 520i 2015 f10 2015 and what kind of programs i can set into my car
thank you

[shawnsheridan]

Originally Posted by moutazsassi

hello guys im new to this website i would like to know if i can code /program my bmw 520i 2015 f10 2015 and what kind of programs i can set into my car
thank you

You can. You need E-Sys, PSdZData, and Launcher PRO or BimmerUtility.

Your Receive PM function is disabled. PM me when working.

[MiroslavVrtal Bmwf11]

Originally Posted by moutazsassi

hello guys im new to this website i would like to know if i can code /program my bmw 520i 2015 f10 2015 and what kind of programs i can set into my car
thank you

Hello, I use Ista for diagnostics and Esys for coding

[automaz_]

Hey guys

I keep getting Adaptive Headlight Malfunction on my 2012 535 x drive. Happened after a car wash but all my lights work properly even the inside cornering ones when I turn the steering wheel. The error code is driving me nuts though

Is there a way I can disable adaptive headlights (I don’t care for the cornering lights)

I found the following in expert mode of footwell module

FRM 3400
AHL_Enable is set to aktiv

What happens if I set that to nicht_aktiv ?

Thanks

[LBSpeed535]

Hey all. Looking for some help.
Anyone around the Detroit area that can help with one quick coding? My ESys is stuck in a loop of token creation and i can't figure out how to get past it (or if someone can help me figure out how to fix this issue that would be great too). Trying to add in gentleman's function in my F10 5 series and just need anyone that might have working ESys or Bimmercode to change the necessary values. If anyone's willing to help please let me know. Thanks.

[shawnsheridan]

Originally Posted by LBSpeed535

Hey all. Looking for some help.
Anyone around the Detroit area that can help with one quick coding? My ESys is stuck in a loop of token creation and i can't figure out how to get past it (or if someone can help me figure out how to fix this issue that would be great too). Trying to add in gentleman's function in my F10 5 series and just need anyone that might have working ESys or Bimmercode to change the necessary values. If anyone's willing to help please let me know. Thanks.

PM sent.

[Dr.phuOnger?]

hi shawnsheridan ,

Would you happen to know if the coding can be done to disable heated steering option? Installing a performance steering wheel and the car heated steering wheel. Instructions state not to connect the heating connector and it will throw an error. Right now not sure if it'll be a nagging error or just an error int he control unit when scanning. If the later is the case then wont' need to deal coding lol

[shawnsheridan]

Originally Posted by Dr.phuOnger?

hi shawnsheridan ,

Would you happen to know if the coding can be done to disable heated steering option? Installing a performance steering wheel and the car heated steering wheel. Instructions state not to connect the heating connector and it will throw an error. Right now not sure if it'll be a nagging error or just an error int he control unit when scanning. If the later is the case then wont' need to deal coding lol

I'd remove Option 248 Steering wheel heater from FA and VO Code car.

[Dr.phuOnger?]

Originally Posted by shawnsheridan

I'd remove Option 248 Steering wheel heater from FA and VO Code car.

Thanks and glad this is an available route.

I briefly checked mycarly and I dont think they have this option so I'll need to look into getting the right coding cables and software.

Only coding i've done lately is with PIWIS for Porsches. Would you have a copy/paste/link guide ?

Else i'm sure I can RTFM and figure out what FA and VO is

[shawnsheridan]

Originally Posted by Dr.phuOnger?

Thanks and glad this is an available route.

I briefly checked mycarly and I dont think they have this option so I'll need to look into getting the right coding cables and software.

Only coding i've done lately is with PIWIS for Porsches. Would you have a copy/paste/link guide ?

Else i'm sure I can RTFM and figure out what FA and VO is

PM sent.

[mylanezu]

Hello friends !

Does anybody found coding solution to extend the hands timing for Traffic Jam Assist ?
In this moment it ask me from 10 to 10 seconds

[AlexL]

OBD2 adapter and ENET cable on the way.

Shawn, please send info pertinent to coding my 2011 F10 550i.

Cheers!

[shawnsheridan]

Originally Posted by AlexL

OBD2 adapter and ENET cable on the way.

Shawn, please send info pertinent to coding my 2011 F10 550i.

Cheers!

PM sent.

[Ajburns651]

Originally Posted by shawnsheridan

PM sent.

Can you send me the programs?

F10 2013 535i.

Thanks.

[shawnsheridan]

Originally Posted by Ajburns651

Can you send me the programs?

F10 2013 535i.

Thanks.

PM sent.

[Ajburns651]

Any way to code out this message? Using a CarPlay mmi.

[Spacebug]

Hi All,

I have just replaced the battery and a previously working ISTA+ is not working anymore.

Basically, yesterday I connected ISTA to my car and read the error codes. It said my battery was worn, so today I got another one fitted. This was registered/activated by the garage that fitted it. I came home to connect up ISTA to check for any new error codes and now I can't connect to the vehicle. I even had the original connection still active on my laptop, but when I ask it to check for faults it doesn't recognise it as the same car.

Starting a fresh connection tells me that it can't connect to the vehicle and I need to activate testing-analysis-diagnosis at the vehicle.

I am not sure what this is, how it is done, and why it is required (never had to do it before).
Just to reiterate - this is a working version of ISTA, with a working cable etc, the only thing that has changed is: a) a new battery and b) the battery was activated by a garage but I am not sure what they used. It reported that activation was successful however.

No errors within the normal idrive system.

Is there some kind of activation required for using ISTA on a car that has had it's battery disconnected? I don't mean coding of the battery to the car, I mean putting the car into a mode where it can be diagnosed with ISTA?

[DanyM]

How to code with Bimmercode automatic turn on seat heating if outside temp is for example 15C?

[byebyev8]

I have a 2014 535i. Is there a way to code out adaptive headlights in bummer code? In frm 3400 I don’t have AHL_enable