BC Forged RS40 19x9.5/10.5 Brushed Silver F80 offsets FOR 1,750

[Black Gold]

BIMMERPOST / Classifieds

Asking Price:

USD 1,900.00

Location:

✓ Will Ship

Item Interest

Sold!

[AutoTalent]

GLWS!

[dmk08]

I just cried a little KP.... good luck on the house.

[Black Gold]

Originally Posted by dmk08

I just cried a little KP.... good luck on the house.

trust me, I did too

ill be back in one if I had to guess

[///M Dream]

Awesome wheels, by a legit seller. GLWS and the new home kenny!

[gtrsam]

nice wheels. good luck on the house. I had to sell my Gtr when I was getting my house built. it was so worth it.

[Black Gold]

Originally Posted by gtrsam

nice wheels. good luck on the house. I had to sell my Gtr when I was getting my house built. it was so worth it.

thanks sir, hopefully we have as much success in our endeavor as you did!

[RowanBuds]

KP, you're like 10 days too late for me. Just ordered same wheels last week, only in Gloss Black. Was wavering between that and the brushed silver after seeing your photos. These wheels are really beautiful, sorry to see you parting with the car, but GLWS, and GLWHouse!

[Black Gold]

Originally Posted by RowanBuds

KP, you're like 10 days too late for me. Just ordered same wheels last week, only in Gloss Black. Was wavering between that and the brushed silver after seeing your photos. These wheels are really beautiful, sorry to see you parting with the car, but GLWS, and GLWHouse!

thanks, and no worries, I am confident you will love them!

[tareemaa]

Glws!! Awesome wheels for an excellent price!

[Black Gold]

Originally Posted by tareemaa

Glws!! Awesome wheels for an excellent price!

thanks, boss

[Mark's M]

Kenny or Rowan, I know these fit the CCB's but specifically to Rowan if you don't mind me asking, did your vendor happen to mention the clearance between the barrel and the rotors? Or for Kenny, was there more rotor/barrel clearance with these vs your OEM wheels? Asking due to the CCB "pebbles stuck in the rotors" issues discussed in the Wheels sub forum. I LOVE these wheels btw, looking for an excuse to buy them.

[Black Gold]

Originally Posted by Mark's M

Kenny or Rowan, I know these fit the CCB's but specifically to Rowan if you don't mind me asking, did your vendor happen to mention the clearance between the barrel and the rotors? Or for Kenny, was there more rotor/barrel clearance with these vs your OEM wheels? Asking due to the CCB "pebbles stuck in the rotors" issues discussed in the Wheels sub forum. I LOVE these wheels btw, looking for an excuse to buy them.

I wish I had more detail, but per the manufacturer the wheels clear ccb with these offsets

These are the same widths and offsets also recommended by IND

Hope this helps

[Mark's M]

Originally Posted by KennyPowers

I wish I had more detail, but per the manufacturer the wheels clear ccb with these offsets

These are the same widths and offsets also recommended by IND

Hope this helps

I think you misunderstood Kenny, I know the widths and offsets are good...perfect actually...but the issue with clearing the CCB's has to do with the clearance (in mm's) between the brake calipers/rotors and the inner barrel of the wheel. On the OEM setup with CCB's there's less than 5mm to play with which allows road debris (small pebbles) to get stuck and damage the inner wheel barrel as you're driving. Just wondering what this gap size is with the BC's, don't want to waste your time if they leave the same amount of room as the OEM's and therefore will likely cause the same issues. I know your car's gone, guess I was hoping you remembered if your rotors/calipers had more room to breath in the OEM setup or more/less room when you put the BC's on.

[Black Gold]

I never had any issues, so I never checked...

I am not sure how to calculate that clearance, I guess it somewhat depends on the inner clearances and the spoke design?

With stock brakes I had no issues either way.

I wish I could answer your question

[RowanBuds]

Originally Posted by Mark's M

Kenny or Rowan, I know these fit the CCB's but specifically to Rowan if you don't mind me asking, did your vendor happen to mention the clearance between the barrel and the rotors? Or for Kenny, was there more rotor/barrel clearance with these vs your OEM wheels? Asking due to the CCB "pebbles stuck in the rotors" issues discussed in the Wheels sub forum. I LOVE these wheels btw, looking for an excuse to buy them.

Originally Posted by KennyPowers

I wish I had more detail, but per the manufacturer the wheels clear ccb with these offsets

These are the same widths and offsets also recommended by IND

Hope this helps

Mark, the vendor advised they will clear CCB's, but did not give clearance specs. Kenny had the standard brakes on his car so I don't know that he can speak to CCB Caliper clearance, but KennyPowers , do you think your factory wheels had less room between inner barrel and caliper? I did ask my vendor for a clearance measurement, but the only reply I got was that the wheels will definitely clear CCB calipers. If the clearance is the same, or minimally greater, I may have the wheels FS before they ever see rubber....

I won't have the car until ~~2 months after I have the wheels, but as soon as I do know I'll inform the forums. The work on my car will be done at ACM, where the wheels will also be at when shipped. I'm going to ask them nicely to see if they can test fit on a CCB car, if they have one available. I'm confident that the clearance will not be less than OEM (As less is practically impossible - IIRC there's 2-3mm clearance only).

[Black Gold]

As much as I would like to say yes, I didn't do a comparison so I can't say which has more clearance.

[Mark's M]

Originally Posted by RowanBuds

Mark, the vendor advised they will clear CCB's, but did not give clearance specs. Kenny had the standard brakes on his car so I don't know that he can speak to CCB Caliper clearance, but KennyPowers , do you think your factory wheels had less room between inner barrel and caliper? I did ask my vendor for a clearance measurement, but the only reply I got was that the wheels will definitely clear CCB calipers. If the clearance is the same, or minimally greater, I may have the wheels FS before they ever see rubber....

I won't have the car until ~~2 months after I have the wheels, but as soon as I do know I'll inform the forums. The work on my car will be done at ACM, where the wheels will also be at when shipped. I'm going to ask them nicely to see if they can test fit on a CCB car, if they have one available. I'm confident that the clearance will not be less than OEM (As less is practically impossible - IIRC there's 2-3mm clearance only).

Much appreciated Rowan, we're on the same page and we've received the same info...which is quite useless in terms of addressing the CCB concerns. I'd like to see a response similar to what Morr came out with with their latest (but expensive) wheel that cleared the CCB's by 6-7mm. Eric @ Pyspeed needs to measure up a set of the BC's against a CCB equipped car and get this suspense dealt with for guys like you who've already ordered and guys like me who want to.

And Kenny thanks for trying to help out and I'm sorry to have bothered you. Still love the wheels but I have to wait and find out what kind of room they'll leave with these PITA brakes lol.

[Rx7andy]

what did u do with the tires?

[Black Gold]

Tires are staying wth the car...

Thanks

[W///]

Wow KP, that was a hell of a quick ownership. Good luck with the house and looking forward to seeing you back in an M soon. I'll be in the same situation... eventually. Until then...

Free bump!

[Black Gold]

Boxed up, ready to ship